Hey guys, 2 questions for ya.
Hardware:
-------------------
Dell Inspiron 1100
Intel Celeron 2.4ghz
Broadcom 4401 10/100
Linksys WPC11 v3.0 PCMCIA card
1) I'm trying to use the WPC11 with Knoppix-STD v0.1b (which uses Knoppix 3.2 as it's base). When Knoppix boots, it recognizes the card, and connects to my wlan perfectly. But, when I try to start kismet_monitor as root, I get:
wlanctl-ng: Operation not supported
2) I've also been trying to get the Broadcom 10/100 card to work with STD v0.1b, but to no avail.
I've done extensive searches of the forums, and unless I'm blind, I cannot find a similar thread/resolution for either problem. I'm not a newbie to linux, just to the LiveCD concept. Any and all help is MUCH appreciated!
-elm3r
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$273.00
Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config
$477.99
Dell Poweredge R730xd 3.5 2x E5-2690 v3 2.6ghz 64gb H730 14x Trays 2x 1100w
$489.99
Dell Poweredge R720xd 2x Xeon E5-2670 2.6GHz 16-Cores 64gb H710p 26x Trays
$339.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R620 Server 2x E5-2660 v2 2.2GHz 20 Cores 256GB RAM 1x 480GB SSD
$139.99
DELL R630 SERVER 8 x 2.5'' 2X E5-2680V4 32GB RAM IDRAC ENT & NDC 2X 495W PSU
$169.95
Dell PowerEdge R620 Server - 256GB RAM, 2x8cCPU, 120Gb SSD/3x900Gb SAS, Proxmox
$320.00
Dell Poweredge R220 Server Xeon E3-1270 v3 3.5ghz Quad Core / 16gb / 1x Tray
$139.99
1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports
$149.00