Hey guys, 2 questions for ya.
Hardware:
-------------------
Dell Inspiron 1100
Intel Celeron 2.4ghz
Broadcom 4401 10/100
Linksys WPC11 v3.0 PCMCIA card
1) I'm trying to use the WPC11 with Knoppix-STD v0.1b (which uses Knoppix 3.2 as it's base). When Knoppix boots, it recognizes the card, and connects to my wlan perfectly. But, when I try to start kismet_monitor as root, I get:
wlanctl-ng: Operation not supported
2) I've also been trying to get the Broadcom 10/100 card to work with STD v0.1b, but to no avail.
I've done extensive searches of the forums, and unless I'm blind, I cannot find a similar thread/resolution for either problem. I'm not a newbie to linux, just to the LiveCD concept. Any and all help is MUCH appreciated!
-elm3r
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
Western Digital Gold Enterprise 4TB,7200 RPM Internal Hard Disk Drive WD4002FYYZ
$39.95
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
SEAGATE ST500LM021 500GB 7200RPM 2.5" SATA 6Gb/s 32MB Laptop Thin Hard Drive
$7.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$89.99
HGST Ultrastar HE10 10TB SATA 6.0Gb/s 7200 3.5" Datacenter HDD - HUH721010ALE601
$79.99
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$87.99
Seagate Exos X18 ST16000NM000J 16TB 7200RPM SATA 6Gb/s 256MB 3.5" Hard Drive
$134.99
1TB HDD/SSD 2.5" SATA Hard Drive for Laptop with Win 10/Win 11 Pro Pre-installed
$44.55
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99