-
knoppix 3.4 kernel 2.6 ethernet help!
Hi i'm italian and sorry for my english!
I have a problem: i installed knoppix 3.4(the last) on my hard disk and works fine but my network connection doesen't work.
I have two ethernet card, one is sis 900(integrated) and one is realtek 8139 .
When is set the netowrk parameters not works , wich ifconfig from shell is the same!
I see if the module is ok but lsmod: no module installed for sis and for realtek.
Which modprobe the module is loaded but not working the network connection!!!
This problem only if i start knoppix with kernel 2.6.6 and the kernel boot report that i have 3 ethernet interfaces!!! i have two.
with kernel 2.4.26 is ok but when i shut down knoppix and restart i lose network configuration and is necessary to rewrite the configuration!
Anyone can explain to me to solve the problem with kernel 2.6.6?
And which method can i use to save a configuration of network card without rewrite all any moment?
Thanks in advance
-
Senior Member
registered user
You may not use the modules for 2.4.x with 2.6.y, nor may you keep the driver during reboot.
The 2.6.y - drivers are located in /lib/modules/2.6.y/... and
the 2.4.x - drivers are located in /lib/modules/2.4.x/...
They aren't compatible.
If you enter: ifconfig eth0 or ifconfig eth1, what do you get?
And do you have a module 8139too.ko?
if you modprobe 8139too, what is the result of lsmod | grep 8139
-
My Knoppix won't auto-connect either
I have connection problem with 3.4 too.
I am running Knoppix 3.4 on HDD. When I first boot I have no connection.
lsmod and ifconfig gives the following;
lsmod gives
root@knopbox:~# lsmod
Module Size Used by Not tainted
raw1394 19252 0 (unused)
ehci-hcd 16616 0 (unused)
autofs4 8756 1
af_packet 13544 0
nls_iso8859-1 2844 0
nls_cp437 4348 0
agpgart 42660 0 (unused)
i810_audio 25208 1
ac97_codec 11884 0 [i810_audio]
3c59x 25456 0 (unused)
forcedeth 9836 1
tuner 9408 1 (autoclean)
tvaudio 12444 0 (autoclean) (unused)
bttv 96320 0 (unused)
i2c-algo-bit 6920 1 [bttv]
i2c-core 12228 0 [tuner tvaudio bttv i2c-algo-bit]
soundcore 3428 2 [i810_audio bttv]
videodev 5600 2 [bttv]
serial 52068 0 (unused)
joydev 7584 0 (unused)
hid 22372 0 (unused)
input 3168 0 [joydev hid]
sbp2 16588 0 (unused)
usb-storage 61952 0
ataraid 6404 0 (unused)
ohci1394 22888 0 (unused)
ieee1394 183300 0 [raw1394 sbp2 ohci1394]
usb-ohci 18088 0 (unused)
usbcore 57824 1 [ehci-hcd hid usb-storage usb-ohci]
pcmcia_core 39840 0
thermal 6532 0 (unused)
processor 8976 0 [thermal]
fan 1568 0 (unused)
button 2508 0 (unused)
battery 5888 0 (unused)
ac 1792 0 (unused)
ide-cd 28704 0
ide-scsi 9040 0
rtc 7004 0 (autoclean)
ext3 64452 1 (autoclean)
jbd 46516 1 (autoclean) [ext3]
I am running Knoppix 3.4 on HDD. When I first boot I have no connection and ifconfig gives the following;
root@knopbox:~# ifconfig
eth0 Link encap:Ethernet HWaddr 00:E0:18F:B1:36
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1 errors:0 dropped:0 overruns:0 frame:0
TX packets:1 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:590 (590.0 b) TX bytes:342 (342.0 b)
Interrupt:20 Base address:0x1000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:10 errors:0 dropped:0 overruns:0 frame:0
TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:500 (500.0 b) TX bytes:500 (500.0 b)
The I go to the Knoppix Network Card configuration and select eth0 and yes to DHCP. I am then connected OK and ifconfig gives the following;
root@knopbox:~# ifconfig
eth0 Link encap:Ethernet HWaddr 00:E0:18F:B1:36
inet addr:192.168.100.11 Bcast:192.168.100.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:349 errors:0 dropped:0 overruns:0 frame:0
TX packets:407 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:139191 (135.9 KiB) TX bytes:70000 (68.3 KiB)
Interrupt:20 Base address:0x1000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:14 errors:0 dropped:0 overruns:0 frame:0
TX packets:14 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:700 (700.0 b) TX bytes:700 (700.0 b)
When I reboot my connection is gone again
I have seen some threads hinting that all this may be caused by windows security updates but that is sure hard to believe.
-
I just ran both 3.3 and 3.4 booting from CD and both still configure internet connection through my eth0 automatically. Something has happened during the HDD install
-
Senior Member
registered user
Are you sure, that the dhcp-setup is correct?
Running netconfig every time is no solution. The networkcard is found, as you see, it only lacks an inet adress.
You may set it manually like this:
ifconfig eth0 192.168.100.11 up
-
I am a noob and I don't have a clue as how to determine if dhcp is set up properly. Can you help me with that.
I know that when I select eth0 from the Knoppix network card configuration and then click on OK for dhcp broadcasting it has no problem finding the IP address and it then connects immediately
-
Senior Member
registered user
My first question is: Who serves that ip-adress?
Is it a different PC, or a device like a dsl-modem?
I have an mini-lan: one desktop and one, sometimes two laptops.
And a dsl-modem to connect to the internet.
From the dsl-modem, I get an ip-adress for ppp-usage.
But I still have a lan-adress for the same network-card (192.168.0.3).
For a small lan, an dhcp-server is overkill - just set a static ip in your initscripts.
-
The IP is the static IP chosen for the local PC that Knoppix is running on
-
Senior Member
registered user
And why do you want to use dhcp? 'd' means 'dynamic' which is the opposite of 'static'.
get root,
write a script /etc/rc4.d/S50ipup.sh:
Code:
#
# (c) turbines 2004
#
ifconfig eth0 192.168.100.11 up
make it executable.
voila.
-
root@knopbox:~# /etc/rc4.d/S50ipup.sh:
bash: /etc/rc4.d/S50ipup.sh:: No such file or directory
Similar Threads
-
By donster in forum Ideas
Replies: 0
Last Post: 08-14-2005, 03:32 AM
-
By pterandon in forum Networking
Replies: 1
Last Post: 05-02-2005, 05:57 PM
-
By arcticice in forum Networking
Replies: 0
Last Post: 01-07-2005, 07:24 AM
-
By JeRM in forum Networking
Replies: 13
Last Post: 11-07-2004, 03:06 PM
-
By UY in forum General Support
Replies: 6
Last Post: 10-22-2004, 12:23 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![Dell OptiPlex 3060 MICRO DESKTOP PC COMPUTER I5 8TH GEN UP TO 32GB UP TO 2TB M.2 picture](/store/img/g/2mYAAOSwmulmdXzA/s-l225/Dell-OptiPlex-3060-MICRO-DESKTOP-PC-COMPUTER-I5-8T.jpg)
Dell OptiPlex 3060 MICRO DESKTOP PC COMPUTER I5 8TH GEN UP TO 32GB UP TO 2TB M.2
$295.00
![Dell 14](/store/img/g/6CgAAOSw80lltRSe/s-l225/Dell-14-TOUCHSCREN-Laptop-8th-Gen-Core-i5-16GB-RAM.jpg)
Dell 14" TOUCHSCREN Laptop 8th Gen Core i5 16GB RAM 512GB SSD/256 Bluetooth W11
$199.00
![Lenovo IdeaCentre 3 07IRB8 Desktop Intel Core i5-13400 16GB 512GB SSD W11H picture](/store/img/g/1UcAAOSwYS9lXgtq/s-l225/Lenovo-IdeaCentre-3-07IRB8-Desktop-Intel-Core-i5-1.jpg)
Lenovo IdeaCentre 3 07IRB8 Desktop Intel Core i5-13400 16GB 512GB SSD W11H
$349.99
![Dell 15.6](/store/img/g/9x4AAOSwVAlmICu5/s-l225/Dell-15-6-NVIDIA-Gaming-Laptop-Intel-Quad-Core-i7-.jpg)
Dell 15.6" NVIDIA Gaming Laptop - Intel Quad Core i7 64GB RAM 2TB SSD Windows 11
$446.00
![Intel Xeon E5-2667 V2 LGA 2011 3.3GHz 8 Core 130W 25MB 8GT/s CPU Processor picture](/store/img/g/rfsAAOSwEFBma4Yr/s-l225/Intel-Xeon-E5-2667-V2-LGA-2011-3-3GHz-8-Core-130W-.jpg)
Intel Xeon E5-2667 V2 LGA 2011 3.3GHz 8 Core 130W 25MB 8GT/s CPU Processor
$14.99
![24](/store/img/g/g78AAOSwVIlmfbIa/s-l225/24-APPLE-iMAC-M1-4-5K-RETINA-1TB-SSD-16GB-RAM-8-CO.jpg)
24" APPLE iMAC M1 4.5K RETINA 1TB SSD 16GB RAM 8-CORE 8-CORE GPU GREEN TOUCH ID
$1395.00
![AMD Ryzen 7 7800X3D 8-Core - 16-Thread 4.2 GHz (5.0 GHz Max Boost) Socket A... picture](/store/img/g/3isAAOSw~lNmI3aE/s-l225/AMD-Ryzen-7-7800X3D-8-Core-16-Thread-4-2-GHz-5-0-G.jpg)
AMD Ryzen 7 7800X3D 8-Core - 16-Thread 4.2 GHz (5.0 GHz Max Boost) Socket A...
$304.95
![Dell Inspiron 142-in-1 Touch Laptop Intel Core 5 Processor 8GB Memory... picture](/store/img/g/sSgAAOSwm3JmUI62/s-l225/Dell-Inspiron-142-in-1-Touch-Laptop-Intel-Core-5-P.jpg)
Dell Inspiron 142-in-1 Touch Laptop Intel Core 5 Processor 8GB Memory...
$549.99
![New HP 24](/store/img/g/TWcAAOSw2QlmXTVp/s-l225/New-HP-24-All-In-One-Desktop-Computer-11th-Gen-i3-.jpg)
New HP 24" All In One Desktop Computer 11th Gen i3 Up To 32GB RAM 2TB SSD Win 11
$409.99
![AMD Ryzen 7 5800X 8-Core 4.7GHz 16-Threads PCIe 4.0 Processor 100-100000063WF picture](/store/img/g/MXUAAOSwGxdlmIW-/s-l225/AMD-Ryzen-7-5800X-8-Core-4-7GHz-16-Threads-PCIe-4-.jpg)
AMD Ryzen 7 5800X 8-Core 4.7GHz 16-Threads PCIe 4.0 Processor 100-100000063WF
$149.99