do
and report.Code:ping localhost ping 127.0.0.1 ifconfig
do you have a firewall running?
Hi people! Sorry wasting your time but... i am kinda newbie and i am having this problem.
I installed the knoppix 3.4 on my hard disk and i tried to configure my eth0 with "netcardconfig". The problem is after setting-up everything with the correct values (and i am pretty that these values are correct) i can't reach my router or another computer in my lan.
Here is the whole thing: I have Fedora Core1 and Windows 2000 in my machine, i have 1 hub and my computer is connected directly to it and i have 1 adsl-modem working as router there, the router's ip is static 192.168.254.254, so any computer in the hub can use this ip as DNS and Gateway and have access to internet. Windows and Fedora are working fine on internet, i am in my Fedora now posting this. The knoppix 3.3 works very nice too, i just need to use "netcardconfig" and give the numbers and ta da!
When i finish the "netcardconfig" there is no error but i can't ping in the router and in another machine. I thought it could be some firewall blocking me but i couldnt find anything like this running in knoppix. When i tried to use the dhcp configuration it didnt work too, and my router have a dchp server working, i tested it in both windows and linux different distros. I have no problems with hardware here because all other systems are working perfectly, i tried many times to make this work in knoppix 3.4 using the "netcardconfig" so i think i am not typing the numbers wrong EVERYTIME.
I am posting this because i couldnt find on internet any information about this, i just dont know what to do, i mean... it recgnize my netcard and accept the configuration but just doesn't work, i dunno if it is a bug or a problem in the driver... i have no clue o_O. If anyone have any idea please tell me
I had another problem with knoppix that i dont think it is related but... i will post here. When i use the knoppix 3.4 in live cd mode it recognizes my emuk001 audio adapter but the sound in the kde opening have problems, it is like "inti... inti... init... init... init... inti... init...." instead of the normal "intiating starting squence". I dont have this problem with the Knoppix 3.3 and i tried 2 different CD's, so.. it is possible that both cd had the same problem in the same track but... hmmm... i don think so . Plus... the ISO i download have an "ok" in md5sum.
Thanks everyone and sorry for my english and your time.
Knoppix-user,
do
and report.Code:ping localhost ping 127.0.0.1 ifconfig
do you have a firewall running?
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
Samsung 16GB 2Rx4 PC4-2133P DDR4-17000 1.2V RDIMM ECC Registered Server Memory
$16.29
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$12.90
A-Tech 16GB 2 x 8GB PC3-12800 Laptop SODIMM DDR3 1600 Memory RAM PC3L 16G DDR3L
$27.98
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
8GB PC3L-12800S 1600MHz SODIMM DDR3 RAM | Grade A
$12.00
Kingston HyperX FURY DDR3 8GB 16GB 32G 1600 1866 1333 Desktop Memory RAM DIMM
$13.25
Samsung 16GB (2x8GB) PC3L-12800S Lap Top Memory RAM
$20.00
A-Tech 256GB 4x 64GB 4Rx4 PC4-19200 ECC Load Reduced LRDIMM Server Memory RAM
$287.96
Samsung 64GB 4DRx4 PC4-2400 LRDIMM DDR4-19200 ECC Load Reduced Server Memory RAM
$71.99