My mobo has an onboard RealTek 8169 chip (Gigabit network) - the correct driver is loaded - r8169.
Knoppix 3.4 (both 2004-05-10 and 2004-05-17) - installed to hard disk
"find" 2 ports - eth0 and eth1
From what I read in the forums, and from answers to my previous networking help posts, I managed to get Knoppix 3.4 (2004-05-10 - kernel 2.6) to connect to the net on eth1 (even though it doesn't physically exist).
I have now installed to hard disk Knoppix 3.4 (2004-05-17- kernel 2.6) and have, by setting my /etc/network settings to static addresses on eth1.
managed to ping an IP address as root, but cannot ping a URL or connect via browser, either as root or user.
It appears that there is a problem resolving URL's.
Also, I believe that there must be a conflict between pump and my network configuration.
How do I stop pump running on boot?
My setup is a router/modem -> Ethernet switch -> PC
The network IPs are relative to the Ethernet Switch port into which the PC is plugged. I would therefore rather not set the PC's IP statically, and should not have to. DHCP should work (it does with Fedora and Xandros and when booting from the Knoppix Live CD.
/etc/network/interfaces
auto lo eth1
iface eth1 inet static
address 192.168.1.2
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.254
/etc/resolve.conf
nameserver 192.168.1.254
thanks
master_b
Cisco Nexus 48-Port 10G SFP+ Switch N9K-9396PX w/ 9K-M12PQ 12-Port 40G QSFP
$249.99
Cisco Catalyst 3850 48 PoE+ 48-Port Gigabit Managed Switch WS-C3850-48F-E
$150.00
Cisco 2900 Series CISCO2911/K9 Integrated Services Router
$46.74
Cisco C9800-L-C-K9 Catalyst Copper Uplink Wireless LAN Controller-Lifetime WRNT
$1790.00
Cisco WS-C3850-48P-L 48-Port Gigabit 3850 PoE Switch w/ 715W+ C3850-NM-4-1G Mod
$83.00
Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850
$38.99
Cisco CBS350-24FP-4G 28 Port PoE Managed Ethernet Switch
$319.99
Lot of 4 Cisco QSFP-40G-SR-BD 10-2945-02 Transceiver Modules Hologram
$47.99
Cisco C9200 48-Port Gigabit Network Switch With Ears P/N: C9200-48T-E Dual Power
$799.97
New Cisco C9200-NM-4X Catalyst 9200 Series Network Module 4 X 10GE *MINT*
$429.97