Hi;
Turn off ddc;
Rem all ModeLine lines under section monitor;
I have installed Knoppix 3.4 using "Beginner style with hardware autodetection".
How can I make screen sizes higher than 1024x768 available for me when using X environment?
The problem is not as simple as it may seem
I manually edited XF86Config-4 (by adding for example 1280x1024 mode) but now I cannot start X at all. It MAY conflict with the built-in autodetection and the later detects 1024x768 as a maximum (at the boot it says: "using modes 1024x768 800x600 640x480").
I have Philips Brillance monitor (1600x1200 @75Hz) and Matrox G400 MAX video card.
Hi;
Turn off ddc;
Rem all ModeLine lines under section monitor;
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$12.90
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
Samsung 128GB (4x 32GB) M86B4G70DM0-CMA3 PC3-14900L 4Rx4 DDR3 ECC Reg Server Mem
$39.99
Lot of 2 32GB DDR4 2666 PC4-21300 SODIMM RAM Modules Mixed Brand
$60.00
24GB (3X8GB) SAMSUNG 8GB PC4-2400T RAM MEMORY M393A1G43EB1-CRC0Q
$54.99
HyperX FURY RAM DDR4 16GB 8GB 32GB 4GB 3200 2666 2400 2133 Desktop Memory DIMM
$9.64
Kingston HyperX FURY DDR3 8GB 16GB 32G 1600 1866 1333 Desktop Memory RAM DIMM
$13.25
A-Tech 256GB 4x 64GB 4Rx4 PC4-19200 ECC Load Reduced LRDIMM Server Memory RAM
$287.96
A-Tech 128GB 2x 64GB 4Rx4 PC4-19200 ECC Load Reduced LRDIMM Server Memory RAM
$143.98