You can't. You needed to boot it up as you wanted it then install. See this post
esher2292
I just ran the knoppix-installer for my HP Pavilion ZX5040 Notebook,
I had to boot the cd Knoppix 3.4 with
linux26 noscsi nousb noapm noapic nodde
otherwise it would get past the Looking for CDROM ..?
(FYI Knoppix 3.3 boots fine without cheat codes.)
I installed Grub and would like to know how to pass cheatcodes?
Thank you,
Mark
You can't. You needed to boot it up as you wanted it then install. See this post
esher2292
That post sys that you need to have the boot options just as you want, for knx2hd?
What I missed to state was I was using the
knoppix-install on 3.4 to partition and install as a basic debian system.
I also found how to pass boot options in gub manually
root (hd0,0)
kernel /boot/vmlinux-2.6.5 lang=us
inited /boot/initrd-2.6.5
boot
I am not sure if all cheatcodes work? Also funny thing was I foudn that the nodma I needed when booting the cd-rom directly on this laptop was not needed when installed on the harddrive. I said to myself that maybe the cdrw/dvdr drive would not work, but it did. (I saw DMA enabled on the drive as it booted.)
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$239.99
Dell EMC 092GD6 Broadcom 9305-16i LSI Quad Port 4 Port SAS RAID Controller
$84.99
36TB SanDisk G-RAID 2 Thunderbolt 3 External Hard Drive - Excellent Condition
$700.00
OWC Guardian Maximus Raid Enclosure SATA Hard Drive FireWire
$36.99
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 4Y5H1 High Profile
$15.99
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
Inspur LSI YZCA-00424-101 Raid Card 12Gbps HBA Controller Low Profile 9300-8i IT
$15.98
9207-8i PCIE3.0 6Gbps HBA LSI FW:P20 IT Mode ZFS FreeNAS unRAID 2* SFF-8087 US
$32.88
Yottamaster 2 Bay RAID Hard Drive Enclosure USB 3.1 For 2.5" SATA HDD SSD UASP
$56.25
Yottamaster 5 Bay RAID Hard Drive Enclosure Type-C B For 2.5" 3.5" SATA HDD SSDs
$131.59