I am booting a generic P3 machine from a KNOPPIX_V3.4-2004-05-17-EN CD ( no hard drive install). I have a Qlogic 1080 card installed, and a Quantum ATL Superloader library attached to it, with a SDLT 320 drive inside. Module qla1280 gets autoloaded, and I can access the drive through device /dev/nst0. When I start writing to a tape using tar or dump, it writes a little bit and then the system completely freezes, requiring a reset. However, when I boot the same machine from an Insert-1.2.8 CD ( which is a Knoppix mini-derivative ), everything works fine.
Any idea how I can debug this problem further?
Thanks
Igor
Lenovo LOQ Laptop, i7-13700H, GB, Up to 1TB SSD, Up To Win 11 Pro
$701.09
Lenovo Ideapad 1 15Iau7 15.6" Laptop Intel Core i5-1235U 8GB RAM 512GB SSD W11P
$299.99
Lenovo ThinkPad E, AMD, 8GB RAM, 256GB SSD, No OS, 20T80005US
$280.00
Lenovo ThinkPad X1 Carbon 7th Intel i7-8665U 1.90GHz 16GB RAM 512 SSD Grade B
$229.99
Lenovo ThinkBook 15 Gen 4 Notebook 15.6" FHD AMD R7 5825U 16GB RAM 512GB SSD
$479.99
Lenovo ThinkBook 15 Gen 4 Notebook 15.6" FHD Intel Core i7-1255U 8GB RAM
$514.99
Lenovo LOQ 15.6" FHD 144Hz Gaming Laptop i5-12450HX 12GB RAM 512GB SSD RTX 3050
$599.99
Lenovo Ideapad 1i 15.6" FHD Touchscreen Laptop - Intel Core i3-1215U with 8GB...
$279.99
Lenovo ThinkPad Yoga Touchscreen Laptop PC 11.6" Windows 10 4GB RAM 256GB SSD
$89.99
Lenovo Yoga 6th Gen ThinkPad 11e 2-in-1 Laptop Windows 10 Pro. 8GB RAM 128GB SSD
$105.00