-
Using a floppy to boot the CD - Please Help
hi, i have a fairly old comp with no boot from cd option in the bios, only supports booting from HDD or floppy.
Is there any way i can use a floppy to boot then load and run knoppix from the cd?
a link to the bood floppy image or similar would be greatly appreciated.
Thanks
PS: am new to linux so please give me an "idiots guide" if anything relativly complex or requiring specific knolage is involved.
-
Re: Using a floppy to boot the CD - Please Help
[quote="Total ImmortalIs there any way i can use a floppy to boot then load and run knoppix from the cd?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Go to [url]http://bootcd.narod.ru/[/url] and get the Bootable CD Loader . It allows older machines to boot to the CD ROM, works in 'most' cases.
-
boot cd from floppy
just make a boot floppy with boot.img or boot-fd.img from the cd istself
boot with both floppy and cd in drives.
it will automatically recognise the cd
-
Senior Member
registered user
I like Smart Boot Manager for just this situation. Instead of making a floppy that only boots one specific cd you can make a floppy that boots any cd
http://btmgr.sourceforge.net/
-
Problem solved, used floppy image Rootman recomened and works a treat, works with all bootable cds i tryed sofar.
Thanks all.
-
Senior Member
registered user
Can this bootfloppy be modified to specify a particular boot cheatcode? For example, could I tell it to automatically use the cheatcode knoppix26 home=scan, so that all I have to do is put in the floppy and CD and reboot to get the 2.6 kernel and my persistent home?
And could I do this to a USB thumbdrive as well (assuming that USB is bootable in BIOS)?
TIA
JD
-
Originally Posted by
j.drake
Can this bootfloppy be modified to specify a particular boot cheatcode? For example, could I tell it to automatically use the cheatcode knoppix26 home=scan, so that all I have to do is put in the floppy and CD and reboot to get the 2.6 kernel and my persistent home?
And could I do this to a USB thumbdrive as well (assuming that USB is bootable in BIOS)?
TIA
JD
I don't think you can... it seems to simply load a cd-rom driver then look for the boot sector on the cd, however, i am no expert on such things and i'm sure it is possable with a diffrent boot floppy from the one i used.
Similar Threads
-
By niceguy167 in forum Hardware & Booting
Replies: 4
Last Post: 10-30-2004, 05:06 AM
-
By Buck1 in forum Hardware & Booting
Replies: 1
Last Post: 04-22-2004, 06:49 PM
-
By proto in forum General Support
Replies: 3
Last Post: 03-17-2004, 11:29 PM
-
By Prieni in forum Hdd Install / Debian / Apt
Replies: 0
Last Post: 03-05-2003, 02:52 PM
-
By Dan_Netwalker in forum Hdd Install / Debian / Apt
Replies: 7
Last Post: 02-23-2003, 01:40 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Western Digital 1TB WD Blue PC Desktop 3.5'' Internal CMR Hard Drive - WD10EARZ
$44.99
Western Digital 1TB WD Blue SA510 SATA SSD Internal 2.5”/7mm Cased - WDS100T3B0A
$89.99
SanDisk 1TB Ultra Dual Drive Go USB Type-C Flash Drive, Black - SDDDC3-1T00-G46
$109.99
Patriot P210 128GB 256GB 512GB 1TB 2TB 2.5" SATA 3 6GB/s Internal SSD PC/MAC Lot
$19.99
2 PACK Seagate ST1000LM035 Mobile HDD 1TB 2.5" SATA III Laptop Hard Drive
$27.25
Samsung - Geek Squad Certified Refurbished 870 EVO 1TB SATA Solid State Drive
$67.99
Kingston NV2 1TB M.2 2280 NVMe PCIe Internal SSD Up to 3500 MB/s SNV2S/1000G
$60.99
SAMSUNG SM961 SERIES 1TB MLC PCIE 3.0 X4 NVME M.2 2280 INTERNAL SSD | MZ-VKW1T00
$64.99
1TB/2TB USB 3.0 Flash Drive Thumb U Disk Memory Stick Pen PC Laptop Storage lot
$80.39