Please try
knoppix noddc vsync=70
"noddc" disables the automatic recognition of the monitor.
Good luck.
I'm trying to boot from the CD and I get an out of range warning on my LCD monitor and although it looks like the boot continues the message from the monitor itself just stays there. I've tried using vsync of 70 and hsync of 35 paramaters but the frequency displayed by the monitor is 87!
Any ideas, please?
Thanks,
RT
Please try
knoppix noddc vsync=70
"noddc" disables the automatic recognition of the monitor.
Good luck.
I don't think Knoppix is recognising the video card (a SiS AG305 by Elite). It does not seem to matters what parameters I pass on boot, I still get the warning, although eventually it will bring up X now, but not using the capabilities of the card or the monitor (at lower resolution etc.).
RT
Dell PowerEdge MX740C Blade Server CTO Chassis H730P
$349.00
Dell PowerEdge FX2S 4 Slot Blade Chassis - CMC, 2x 2400W PSU
$299.00
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
Nutanix NXS2U2NL12G500 2U Server with 2x X10DRT-P-G5-NI22 Blades USED
$349.99
Dell PowerEdge M620 Blade Server 2 x Xeon e5 2665 8 x 16 GB(128) RAM - No HD
$44.99
Dell PowerEdge M620 Blade Server
$39.99
Dell PowerEdge M620 Blade Server/8x8 GB Ram (64GB)/2x Intel Xeon E5-2680 2.70GH
$50.00
HP ProLiant BL460c Gen9 Blade Server x2 Intel Xeon E5-2698 v3 - 512GB RAM
$251.37
Dell PowerEdge M1000e Chassis w/ 16 x M600 Blade Servers(No Ram, 2 x 147GB HD)
$300.00
Dell PowerEdge FC830 8-SFF 4*Xeon E5-4669v3 2.1GHz No HDD/RAM Blade Server Node
$179.99