Results 1 to 6 of 6

Thread: Stalled AT Poor Man's install with KNOPPIX 3.4

  1. #1

    Stalled AT Poor Man's install with KNOPPIX 3.4

    Hi!
    Just downloaded knoppix3.4 iso last night under windows ,
    I have many times used the FAQ located at
    (http://www.knoppix.net/docs/index.php/HdBasedHowTo)
    to install the KNOPPIX 3.4 from my hard drive instead of from CDROM.

    I copied KNOPPIX to D:\KNOPPIX\

    strangly knoppix3.4 doesn't contain "mkfloppy.bat"& "boot-en.img" anymore.
    later I tried "mkfloppy.bat"& "boot-en.img" from KNOPPIX3.0 cd ,it just couldn't find knoopix file on
    "D:"(hda3)....I just stalled there........

    What should i do to install from HD properly?any more concise methods?
    pls. inform the actual commands step by step!

    Thanks in advance!

    Regards!

    TOM

  2. #2
    Senior Member registered user
    Join Date
    Mar 2003
    Location
    Portland, OR USA
    Posts
    568
    With Knoppix 3.4, it's really easy to run with the ISO saved on your hard drive. (Even on an NFTS partition, which is safe, since it's read-only.) Boot from the Knoppix CD (!) like normal, but use the cheatcoade bootfrom at the boot prompt.

    For example, say I have KNOPPIX_V3.4-2004-05-17-EN.iso saved on my hard drive in the directory C:/Andrews/Downloads/Live-CDs. The command I'd use, after booting from the Knoppix CD, is this:

    knoppix26 bootfrom=/dev/hda1/Andrews/Downloads/Live-CDs/KNOPPIX*.iso

    Add other cheatcodes as normal.

    It's a whole lot faster than running Knoppix off the CD, that is for sure! Plus it should free up your CD drive for other things.

  3. #3
    Hi!

    I just tried:

    ==========
    knoppix26 bootfrom=/dev/hda12/Downloads/KNOPPIX_V3.4-2004-05-17.iso
    =============

    it returned with: no such kernel,
    what should I do next?

    also what do you mean by "Add other cheatcodes as normal"? could you specify it?

    till then.......


    Tom

  4. #4
    Senior Member registered user
    Join Date
    Mar 2003
    Location
    Portland, OR USA
    Posts
    568
    Quote Originally Posted by musclemania2004
    it returned with: no such kernel
    Are you booting from a Knoppix 3.4 CD? Doesn't sound like it, else booting with "knoppix26" would work. More important, I think the "bootfrom" cheatcode will only work with Knoppix 3.4.

    If you can't, we'll go to Plan B(tm).

    Quote Originally Posted by musclemania2004
    also what do you mean by "Add other cheatcodes as normal"? could you specify it?
    This kind of depends on your computer and whether you've got a persistent home and configuration files saved. But to give you an idea, I use:

    knoppix26 bootfrom=/dev/hda1/Andrews/Downloads/Live-CDs/KNOPPIX*.iso noapm alsa myconf=/dev/hda2 home=/dev/sda1/knoppix.img

    "noapm" disables Advanced Power Management, which (on my computer) causes Knoppix to hang. (YMMV)

    "alsa" causes Knoppix to load the ALSA sound drivers instead of OSS.

    The "myconf=" line tells Knoppix to load the saved configuration files from hda2 (a partition on my hard drive).

    The "home=" line tells Knoppix to load a persistent home directory off a USB thumb drive (aka "sda1").

  5. #5
    Hi!

    Are you booting from a Knoppix 3.4 CD? Doesn't sound like it, else booting with "knoppix26" would work. More important, I think the "bootfrom" cheatcode will only work with Knoppix 3.4.
    currently I boot from knoppix3.0 CD as I don't own a CD-burner yet .....
    so it won't work with "knoppix26",
    Pls. elabrate the details of your suggested "PlanB(tm)" step by step & command by command,ok?
    I await .............................

    Regards!

    tom

  6. #6
    Senior Member registered user
    Join Date
    Jul 2003
    Posts
    692
    I'm pretty sure that your boot version and run version have to match. Version 3.4 uses a fundamentally different boot process. That's why when you're researching how to do a "poor man's" install of version 3.4, you can pretty well disregard everything that was written on the topic prior to May 2004, when 3.4 was released. As a result, probably 85% or more of the stuff you find on the WIKI or by searching is going to be worthless.

    I think Plan B would involve making boot floppies once you have the program (NOT the iso file) saved on your hd. Trouble is, you have to get into knoppix 3.4 to do this and to make the boot floppies.

    As far as I can tell, based upon what I have read so far, you are stuck unless and until you get a 3.4 CD burned or purchased, or until someone makes the 3.4 boot floppies for you.

    jd

Similar Threads

  1. Poor Man's DVD Install
    By xfiles in forum Knoppix DVD
    Replies: 1
    Last Post: 09-02-2005, 06:20 AM
  2. Replies: 2
    Last Post: 03-01-2005, 02:10 PM
  3. Floppy for Poor Man's Install?
    By bigkahuna in forum Hdd Install / Debian / Apt
    Replies: 0
    Last Post: 01-13-2005, 08:22 PM
  4. my poor man's install setup
    By probono in forum The Lounge
    Replies: 11
    Last Post: 09-27-2004, 03:34 PM
  5. Poor man's install???
    By Obsidian in forum Hdd Install / Debian / Apt
    Replies: 1
    Last Post: 08-28-2003, 06:34 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


DELL PowerEdge R710 Server 2×Xeon 6-Core 3.33GHz + 144GB RAM + 8×1.2TB SAS RAID picture

DELL PowerEdge R710 Server 2×Xeon 6-Core 3.33GHz + 144GB RAM + 8×1.2TB SAS RAID

$484.84



Dell Poweredge R720 3.5

Dell Poweredge R720 3.5" 2x E5-2680 2.7ghz 16-Cores 64gb H710 8x Trays 2x750w

$384.99



Dell PowerEdge R720 Server / 2x E5-2640 = 12 Cores / 64GB RAM / H710 / 4x Trays picture

Dell PowerEdge R720 Server / 2x E5-2640 = 12 Cores / 64GB RAM / H710 / 4x Trays

$299.99



Dell PowerEdge R730XD Server 24BAY 2.5

Dell PowerEdge R730XD Server 24BAY 2.5" H730P Controller Dual 750W - BareBone

$449.99



Dell Poweredge R410 2 X SIX CORE 2.40GHZ E5645 32GB RAM 500GB HHD SERVER QTY picture

Dell Poweredge R410 2 X SIX CORE 2.40GHZ E5645 32GB RAM 500GB HHD SERVER QTY

$159.99



Dell PowerEdge R720xd Server | 2x E5-2680 2.7Ghz = 16 Cores | 48GB | 4x 2TB SAS picture

Dell PowerEdge R720xd Server | 2x E5-2680 2.7Ghz = 16 Cores | 48GB | 4x 2TB SAS

$550.00



Dell PowerEdge R710 Server 2x E5645 2.4GHz = 12 Core 32GB PERC6i 4x 900GB SAS picture

Dell PowerEdge R710 Server 2x E5645 2.4GHz = 12 Core 32GB PERC6i 4x 900GB SAS

$315.95



Dell PowerEdge R620 Server / 2x E5-2670 V2 2.5GHz = 20 Core / 64GB RAM / 2TB SAS picture

Dell PowerEdge R620 Server / 2x E5-2670 V2 2.5GHz = 20 Core / 64GB RAM / 2TB SAS

$465.00



Dell PowerEdge R720XD Server | 2x 2.8GHz 20 Cores | 128GB | H710 | 20TB Storage picture

Dell PowerEdge R720XD Server | 2x 2.8GHz 20 Cores | 128GB | H710 | 20TB Storage

$936.95



Dell Poweredge R730 2x Xeon E5-2620 v3 2.4ghz 12-Cores / 32gb / H730 / iDracEnt picture

Dell Poweredge R730 2x Xeon E5-2620 v3 2.4ghz 12-Cores / 32gb / H730 / iDracEnt

$419.99