I believe the DWL-650 is a ACX-100 based Wifi card.
So already tried this ? :
http://www.houseofcraig.net/acx100_howto.php#app_b
I see knoppix 3.4 still uses Orinoco driver for my D-link DWL-650 (prism2) card. This is not the optimal driver, but hostap or wlanng should be used instead. The reasons are the gain of stability and features (master mode).
To fix this i had to:
That is, toughly replace "orinoco" for "hostap".Code:cd /etc/pcmcia for i in config*; do cat $i | sed 's/orinoco/hostap/g' > kk ; mv -f kk $i; done /etc/init.d/pcmcia restart
Is there a better way of enabling hostap driver? Is this already fixed en later releases?
I believe the DWL-650 is a ACX-100 based Wifi card.
So already tried this ? :
http://www.houseofcraig.net/acx100_howto.php#app_b
By the way, DWL-650+ (mind the '+' sign) is the acx100 based.Originally Posted by ktheking
I own both cards, for the second card i must download and compile driver apart (thanks for the link anyway )
I was going to suggest also suppor for acx100 driver, but someone has started a thread on that issue already.
HP ProLiant MicroServer Gen8 Server Xeon E3-1220L 16GB RAM No HDD's
$299.00
HP Proliant MicroServer Gen 8 2.3GHz CPU 16GB RAM NO DRIVES/CADDIES INCLUDED
$179.99
HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ*
$94.99
HPE PROLIANT MICROSERVER GEN10 PLUS MICRO TOWER SERVER - USED
$550.00
HPE ProLiant MicroServer Gen 10 Plus, Xeon E-2224, 16GB DDR4, 1TB M.2 NVMe SSD
$750.00
HP ProLiant MicroServer Gen8 Server Intel Xeon E3-1220L v2 16GB DDR3 (4) 4TB HDs
$399.00
HP ProLiant Microserver Micro Server HSTNS-5151 untested
$75.00
HP ProLiant MicroServer Gen8 Server Xeon E3-1220L 8GB RAM No HDD's
$229.99
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server P54644001
$849.99
HPE microserver Gen8 Update Firmware iLO4 + BIOS System Latest HP Server FAST⚡️✅
$79.99