-
Knoppix X TV-out Failure (Geforce3)
I am having problem when trying to boot the system using a television set as the display.
I intend to use knoppix in a home theatre PC, with the TV plugged into the svideo-out (tv out) of my Geforce3.
When past the boot prompt I get:
You have passed an undefined mode number. Press <RETURN> to see video modes available, <SPACE> to continue or wait 30 secs
However I suspect this is just the res/mode to use for displaying the console/text?
The real problem is X either failing to load or if it does load, the screen scrolling wildly and fuzzily like when you try and display a resolution or refresh rate too high for your monitor or video card.
When I use any of:
Code:
knoppix screen=640x480
knoppix noddc screen=640x480
knoppix screen=320x240
knoppix noddc screen=320x240
knoppix screen=720x576 (I think this is supposed to be the 'PAL' resolution)
knoppix noddc screen=720x576
... X loads but the screen is fuzzy and scrolling wildly as described above.
When I use any of:
Code:
knoppix noddc screen=anything vsync=50 hsync=15.625 (this is suppose to be the refresh rates of PAL I think)
knoppix noddc screen=anything vsync=50 hsync=15
knoppix noddc screen=anything vsync=50 hsync=16
knoppix noddc screen=anything vsync=50 hsync=28
(with any of the resolutions tried above)
... X fails to load, and then knoppix tries again with XFree86(vesa) and then XFree86(bmzsomething), and then gives up and I have the prompt (not the 'limited' prompt that you are sometimes given when booting fails).
Knoppix/X loads fine on the same system with a monitor plugged in.
It is a 333mhz celeron system with 256MB of RAM and a Geforce3.
I've also tested the CD on at least three other computers including a laptop, with no problems at all.
I've looked through the cheat codes list but nothing really stands out at me as a potential solution ![Sad](images/smilies/icon_sad.gif)
Help me Obi-Wan Kenobi! You're my only hope!!
-StormCyko
Similar Threads
-
By thelordofthechip in forum Hdd Install / Debian / Apt
Replies: 0
Last Post: 06-25-2005, 02:16 PM
-
By OpenIntro in forum Hardware & Booting
Replies: 27
Last Post: 04-05-2005, 10:59 PM
-
By new~bie in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 06-13-2004, 01:49 AM
-
By Alan in forum General Support
Replies: 12
Last Post: 06-11-2003, 10:24 AM
-
By Nedly in forum Hardware & Booting
Replies: 5
Last Post: 04-05-2003, 02:12 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![DELL PowerEdge R430 8SFF 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45 picture](/store/img/g/1hMAAOSw8hVl8bKq/s-l225/DELL-PowerEdge-R430-8SFF-2x-E5-2680v4-2-4GHz-28-Co.jpg)
DELL PowerEdge R430 8SFF 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$226.00
![Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD picture](/store/img/g/vx0AAOSwvwFlExVY/s-l225/Dell-PowerEdge-R630-Server-2x-E5-2680-V4-28-Cores-.jpg)
Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD
$197.99
![Cisco UCS C240 M4 2U Server w/ 2x E5-2680v4, NO RAM picture](/store/img/g/Je8AAOSwIcdmTgJF/s-l225/Cisco-UCS-C240-M4-2U-Server-w-2x-E5-2680v4-NO-RAM.jpg)
Cisco UCS C240 M4 2U Server w/ 2x E5-2680v4, NO RAM
$49.99
![Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays picture](/store/img/g/GAcAAOSw9Q1mGSZW/s-l225/Dell-Poweredge-R630-Server-2x-E5-2620-V4-16-Cores-.jpg)
Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays
$159.99
![Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330 picture](/store/img/g/ZD0AAOSwm41mOZYw/s-l225/Dell-PowerEdge-R630-Server-2x-E5-2640v3-2-60Ghz-16.jpg)
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
![Dell PowerEdge R620 Server 2x E5-2660 v2 2.2GHz 20 Cores 256GB RAM 1x 480GB SSD picture](/store/img/g/Fk4AAOSwDDplpAyL/s-l225/Dell-PowerEdge-R620-Server-2x-E5-2660-v2-2-2GHz-20.jpg)
Dell PowerEdge R620 Server 2x E5-2660 v2 2.2GHz 20 Cores 256GB RAM 1x 480GB SSD
$139.99
![Dell PowerEdge R720xd 26HDD 300gb 2.5-inch E5-2697 X 2CPU 384RAM 7.2 Tb HDD  picture](/store/img/g/yAwAAOSwdyNlgQ8d/s-l225/Dell-PowerEdge-R720xd-26HDD-300gb-2-5-inch-E5-2697.jpg)
Dell PowerEdge R720xd 26HDD 300gb 2.5-inch E5-2697 X 2CPU 384RAM 7.2 Tb HDD 
$180.00
![SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount picture](/store/img/g/MFoAAOSwQYhmavYc/s-l225/SuperMicro-Server-505-2-Intel-Atom-2-4GHz-8GB-RAM-.jpg)
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
![1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 240GB SSD 2x 10GBE picture](/store/img/g/7KoAAOSwephiKTf4/s-l225/1U-Supermicro-Server-10-Bay-2x-Intel-Xeon-3-3Ghz-8.jpg)
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 240GB SSD 2x 10GBE
$259.00
![Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config picture](/store/img/g/CdkAAOSwY0BmYMoF/s-l225/Dell-Poweredge-R730xd-LFF-14-Bay-2U-Server-Choose-.jpg)
Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config
$489.99