-
Can you post your fstab? Strange though that it used to mount ok, but there's always hope...
Are you quite sure your hda is physically ok?
-
Junior Member
registered user
I think it is physically ok. I can mount it manually and it works flawless then.
Here is my fstab:
Code:
# /etc/fstab: filesystem table.
#
# filesystem mountpoint type options dump pass
/dev/hda2 / reiserfs defaults 0 1
proc /proc proc defaults 0 0
/dev/fd0 /floppy vfat defaults,user,showexec,umask=022 0 0
usbdevfs /proc/bus/usb usbdevfs defaults 0 0
sysfs /sys sysfs defaults 0 0
/dev/sr1 /dvd iso9660 defaults,ro,user,noexec,unhide 0 0
/dev/sr0 /cdrom iso9660 auto,ro,user,noexec,unhide 0 0
# Added by KNOPPIX
/dev/hda1 /mnt/hda1 ntfs noauto,users,exec,ro,umask=000 0 0
# Added by KNOPPIX
/dev/hda3 /mnt/hda3 vfat noauto,users,exec,umask=000 0 0
# Added by KNOPPIX
/dev/hda5 /mnt/hda5 auto noauto,users,exec 0 0
# Added by KNOPPIX
/dev/hda6 none swap defaults 0 0
EDIT: darn, now that I read it... who did set them to noauto? grrr, not me
-
Junior Member
registered user
Now that I've set them to auto again, it works. I really do not know how they came to be set to noauto. I have not modified it, nor anyone with access to my machine. Strange, must be Bill G. who had his fingers hin it.
-
Sorry, but you can't blame Bill for this one, everything else YES.
I think Knoppix recreates your fstab under the lines saying # Added by KNOPPIX.
You can either comment out the part about rebuilding fstab in /etc/init.d/knoppix-autoconfig, or add nofstab to the append line in lilo.conf.
Similar Threads
-
By mkyb14 in forum Hdd Install / Debian / Apt
Replies: 5
Last Post: 12-16-2004, 11:03 PM
-
By Stealth870 in forum General Support
Replies: 0
Last Post: 08-16-2004, 12:23 AM
-
By The_Martian in forum Hardware & Booting
Replies: 3
Last Post: 07-17-2004, 12:42 AM
-
By Ander in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 01-11-2004, 01:49 AM
-
By Joe999 in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 11-14-2003, 06:37 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
SUN Blade X6250 Server 8GB RAM DUAL PROCESSORS 594-4531-01
$109.99
CISCO 5108 Blade Server Chassis N20-C6508
$200.00
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG
$69.99
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge C6400 Blade Server Chassis w/ 2x 2400W PSUs - Preproduction Model
$349.00
Dell PowerEdge MX7000 CTO Blade 8 slot 7U Chassis 6x 3000W 2x MX9002m
$2399.00
Dell PowerEdge M620 Blade Server
$39.99
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99