-
Junior Member
registered user
![Quote](images/misc/quote_icon.png)
Originally Posted by
champagnemojo
![Quote](images/misc/quote_icon.png)
Originally Posted by
xSauronx
anywa to get automount to not look for a floppy drive?
I've always had the same issue on my laptop. Yes, you can turn off the automounter. Just run:
Code:
/etc/init.d/autofs stop
If you want to stop it permanently (and trust me you do) then also run:
Code:
update-rc.d -f autofs remove
i did this, it still stalls for 1-2 minutes when i graphically broswe /mnt
![Quote](images/misc/quote_icon.png)
Originally Posted by
mzilikazi
My dvd drive is the Primary Slave so it's called /dev/hdb. I just do this:
ln -s /dev/hdb /dev/dvd
when booting, it says my dvd/rw is hdc
but i have *no* /mnt/hdc or /dev/hdc at all....wth? how do i use my dvd drive if its not seeing it there?
-new question- how do i find which "folders" are linked to which partitions? i have partition hda6 that is showing as 30gb and almost full, im pretty sure i have hda6 set as /home but my /home has under 50meg in it; where do i find out what else is using this parition so i can get my data?
-also- qparted shows hda8 as ~35gigs, and almost full. but if i look at hda8 from the desktop link i see....nothing. nada. is something wrong? or is it similar to my above situation; that i just dont know what im looking for? ![Smile](images/smilies/icon_smile.gif)
thanks so much guys
-
Senior Member
registered user
![Quote](images/misc/quote_icon.png)
Originally Posted by
xSauronx
when booting, it says my dvd/rw is hdc
but i have *no* /mnt/hdc or /dev/hdc at all....wth? how do i use my dvd drive if its not seeing it there?
I *think* I see what's been so confusing for you. Hopefully I don't make it worse. ![Smile](images/smilies/icon_smile.gif)
Linux uses symlinks or 'symbollic links' It's just another name for the same device or directory.
Why do you need more than one name for a device or directory?
To make things simple *most* applications will look to use /dev/dvd to play dvd's but!!......how do you know which device is actually the dvd drive?
Afterall your dvd drive can be in any of four positions on the pci bus right?
/dev/hda - primary master
/dev/hdb - primary slave
/dev/hdc - secondary master
/dev/hdd -secondary slave
To make things uniform we teach Linux to call our drive /dev/dvd with a symbolic link no matter where it is on the pci bus.
ln -sf /dev/hdc /dev/dvd
ln (link) -s (symbolicly) -f (force- to remove any existing links) /dev/hdc (your actual device) /dev/dvd (new name of device)
That's it.
How to see if it worked?
Code:
ls -al /dev/dvd
lrwxr-xr-x 1 root root 8 Jun 11 16:05 /dev/dvd -> /dev/hdc
-new question- how do i find which "folders" are linked to which partitions?
Well you can do this:
to see what's mounted and how it's mounted.
You can do this:
to see what partitions are available on your drives.
i have partition hda6 that is showing as 30gb and almost full, im pretty sure i have hda6 set as /home but my /home has under 50meg in it; where do i find out what else is using this parition so i can get my data?
-also- qparted shows hda8 as ~35gigs, and almost full. but if i look at hda8 from the desktop link i see....nothing. nada. is something wrong? or is it similar to my above situation; that i just dont know what im looking for?
thanks so much guys
It sounds like your desktop icons are possibly not mounting the partitions they represent. Forget the desktiop icons and mount the partitions by hand:
Code:
mount /dev/hda8 /mnt/hda8
OR better yet why not mount /dev/hda8 somewhere that's at least a bit meaningful?
Code:
su
mkdir /music
mount /dev/hda8 /music
Make whatever directory you want and mount your drive wherever you want. The point is that you can mount a drive anywhere as long as the mount point actually exists! ![Wink](images/smilies/icon_wink.gif)
HTH
-
Junior Member
registered user
thath helped a bit
but theres still nothing seeing hdc (which is my dvd drive, as its the master on the second ide channel)
again, its not in /dev or/mnt as anything, and again, i dont know why since it worked a couple days ago, and nothing you guys have told me would have changed it :/
but when im booting and linux is loading, it mentions hda as my WD1200 drive and HDc as my lite-on dvd drive
grrr
-
Senior Member
registered user
Either I don't write too clearly or you didn't do what I wrote. Do the following and post the output:
ls -al /dev/dvd
IF is DOESN'T say this:
lrwxr-xr-x 1 root root 8 Jun 11 16:05 /dev/dvd -> /dev/hdc
Then do this:
ln -s /dev/hdb /dev/dvd
Then do this again:
ls -al /dev/dvd
-
Junior Member
registered user
ls -al /dev/dvd
outputs
Irwxrwxrwx 1 root root 8 Jun 15 18:19 /dev/dvd -> /dev/hdc
still getting this from xine:
There is no input plugin available to handle 'dvd:/'
Maybe MRL syntax is wrong or file/stream source doesnt exist
Similar Threads
-
By A. Jorge Garcia in forum General Support
Replies: 28
Last Post: 08-25-2004, 03:30 PM
-
By wolfgang_a_h in forum Hdd Install / Debian / Apt
Replies: 3
Last Post: 12-21-2003, 01:11 AM
-
By ndrake in forum Hdd Install / Debian / Apt
Replies: 3
Last Post: 09-29-2003, 02:26 AM
-
By Entropy42 in forum Customising & Remastering
Replies: 0
Last Post: 04-13-2003, 06:38 AM
-
By rattler in forum General Support
Replies: 3
Last Post: 01-22-2003, 03:28 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![New Precision DWDM SFP+ 10G 80km Tunable Transceiver 50GHz C-Temp DWDM-SFP10G-C picture](/store/img/g/tqEAAOSwkbxmR-l8/s-l225/New-Precision-DWDM-SFP-10G-80km-Tunable-Transceive.jpg)
New Precision DWDM SFP+ 10G 80km Tunable Transceiver 50GHz C-Temp DWDM-SFP10G-C
$90.00
![LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module picture](/store/img/g/JEEAAOSwzu9ibCFX/s-l225/LOT-OF-20-Genuine-Cisco-SFP-10G-SR-V03-10GBASE-SR-.jpg)
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$95.00
![Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC picture](/store/img/g/aIgAAOSwXWNi1sm1/s-l225/Brand-New-Cisco-GLC-LH-SMD-1000BASE-LX-LH-SFP-Modu.jpg)
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$12.99
![Lot (10) Dell 0N8TDR 850nm SFP-10G-SR-85C 10Gbs sfp+ FTLX8574D3BNL-FC N8TDR NEW picture](/store/img/g/E7cAAOSw98tljuIT/s-l225/Lot-10-Dell-0N8TDR-850nm-SFP-10G-SR-85C-10Gbs-sfp-.jpg)
Lot (10) Dell 0N8TDR 850nm SFP-10G-SR-85C 10Gbs sfp+ FTLX8574D3BNL-FC N8TDR NEW
$68.00
![Original CISCO SFP-10G-SR V03 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module picture](/store/img/g/KTkAAOSwcmBisISE/s-l225/Original-CISCO-SFP-10G-SR-V03-10-2415-03-850nm-10G.jpg)
Original CISCO SFP-10G-SR V03 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module
$6.80
![CISCO SFP-10G-LR SFP TRANSCEIVER MODULE GBIC 10G 10GB SFP - 1 Year Warranty picture](/store/img/g/FkQAAOSwtBZbqRX9/s-l225/CISCO-SFP-10G-LR-SFP-TRANSCEIVER-MODULE-GBIC-10G-1.jpg)
CISCO SFP-10G-LR SFP TRANSCEIVER MODULE GBIC 10G 10GB SFP - 1 Year Warranty
$39.99
![Cisco SFP-10G-LR 10-2457-02 V02 10GBASE-LR SFP+ TRASNCEIVER COMPATIBLE picture](/store/img/g/Lx4AAOSw4utladDf/s-l225/Cisco-SFP-10G-LR-10-2457-02-V02-10GBASE-LR-SFP-TRA.jpg)
Cisco SFP-10G-LR 10-2457-02 V02 10GBASE-LR SFP+ TRASNCEIVER COMPATIBLE
$19.90
![Lot of 10 - HP 10Gb SR SFP+ Transceiver 455883-B21 455885-001 456096-001 850nm picture](/store/img/g/NXsAAOSwAktlSXfr/s-l225/Lot-of-10-HP-10Gb-SR-SFP-Transceiver-455883-B21-45.jpg)
Lot of 10 - HP 10Gb SR SFP+ Transceiver 455883-B21 455885-001 456096-001 850nm
$27.99
![SFP-10G-SR CISCO 10G SR SFP+ C-CLASS TRANSCEIVER 10 PACK picture](/store/img/g/qxMAAOSwBBFl62ur/s-l225/SFP-10G-SR-CISCO-10G-SR-SFP-C-CLASS-TRANSCEIVER-10.jpg)
SFP-10G-SR CISCO 10G SR SFP+ C-CLASS TRANSCEIVER 10 PACK
$99.00
![Nvida Mellanox MC3208411-T 1000GBASE-T SFP-TX 100m Optical 1GbE Base-T RJ45 New picture](/store/img/g/sr8AAOSwIDNmJdQB/s-l225/Nvida-Mellanox-MC3208411-T-1000GBASE-T-SFP-TX-100m.jpg)
Nvida Mellanox MC3208411-T 1000GBASE-T SFP-TX 100m Optical 1GbE Base-T RJ45 New
$27.95