-
$DISPLAY question
Greeting again !
I want to use xconsoleto (keep an eye on logs.
but when starting the apps. from a shell,
keeps telling me :
dah@home:/# xconsole
Error: Can't open display:
I got the same result for a bunch of other X
apps. ?!?
How can I resolv this problem ?
Thanks
-
This could be the result of one of two (or possibly both) things.
Firstly, you need to have an environment variable called DISPLAY set to tell the X programs where to draw themselves. This should be set when you are first logged in, but often when you su to root this is not set in the root shell. This is normally set to ":0.0" which means the first display on the local machine. You can double check what the value should be by echoing the value of $DISPLAY before you su to root.
However, when you have done this, it is possible that you will get an error about the connection being refused by the server. In order to fix this, you must run the xhost command to grant access permissions to your display. This must be done before you su to root. It should be possible to run something like "xhost localhost" which will allow access to any program running on your local machine, but I couldn't seem to get this work. You can also do "xhost +" which basically completely disables any sort of access control.
WARNING, doing xhost + is a security risk if your computer is connected to any sort of a network because it basically allows open access to your machine.
-
Follow up on the problem with $DISPLAY
When doing a "su -"
and trying to start any apps. in a shell, error cannot connect to display.
but when executing the apps. from under the original user account
everything seems to work fine ...
but I have problem with video4linux, camserv seems to not
work properly :-S
please help
-
For some security reasons X only allows one connection at a time. You can either do: kdesu appname to run it as root or create a workaround with:
ln -s /home/your_username/.Xauthority /root/.Xauthority
Sorry, not a clue about camserv. Any error messages on that one?
-
$DISPLAY problem
no error from camserv, even if I start the process using
a 'usual' account. (not admin / root) and nothing
comes up onthe webpage...
Similar Threads
-
Replies: 5
Last Post: 07-09-2005, 04:40 PM
-
By maestrobwh1 in forum General Support
Replies: 3
Last Post: 09-19-2004, 12:58 AM
-
By illcuban in forum General Support
Replies: 2
Last Post: 12-21-2003, 07:14 PM
-
By mark1221 in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 11-01-2003, 10:32 PM
-
By jclochesy in forum Hardware & Booting
Replies: 6
Last Post: 08-25-2003, 11:04 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller
$28.00
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
Intel PCIe SSD AIC RAID Controller Card G97168-252
$44.55
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRaid 9361-8i 12Gbps SAS / SATA Raid Controller PCIe x8 3.0 Tested
$29.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$87.99
4 Bay RAID External Hard Drive Enclosure for 2.5/3.5" SATA HDD/SSD
$79.99
Dell LSI 9440-8i MegaRAID 8 Port 12GB/s HBA High Profile RAID Controller YW3J6
$84.99