-
panic: No init found. Try passing init= option to Kernel
hi
what this means:
"panic: No init found. Try passing init= option to Kernel"
help pls.
-
Re: panic: No init found. Try passing init= option to Kernel
Salve berdy!
>what this means:
>"panic: No init found. Try passing init= option to Kernel"
What is the context? When you got this message with booting Knoppix
from CD, is this not good ...
If you booting with lilo and got this message, your lilo.config
was not complete. There must stand "init=/etc/init"
So please tell more, to help you better....
rob
-
hi rob, thanx for reply.
so, when i'm booting from CD in the end it says that "panic: no init found. try passing init= option to kernel" and nothing like "init=/etc/init" and thats it. whats wrong? what should i do?
-
Senior Member
registered user
Your CD may be bad.
Boot up with:
knoppix testcd
and have knoppix check your cd, if it's OK, then maybe try it on another computer.
HTH
rock
-
I get the same error, i dont see any init= cheatcodes anywhere, i tried failsafe, lang, various other combinations.. After several write errors, it ends in kernel panic and the same as the first msg in this thread. The cd is good, my third one ive burned and tried, and using another computer is not an option. Any ideas?
-
bleh, the mirror i downloaded the iso from didnt have the current version, so i got 5/20/03, instead of 6/06/03 >, trying again with current..
-
I'm getting this error too
-
Senior Member
registered user
I'm seeing the same; I've now tried with 3 different 3.2 versions, to no avail
See my other thread at http://www.knoppix.net/forum/viewtopic.php?t=3914#18278
If someone has found a work-atound, I'd be grateful to hear about it!
-
I'm seeing the same error, and I believe (at least in
my case) it is due to not having enough memory. I'm testing
on a board with only 16Mb of RAM.
Looking back through the logs, I see
Creating directories and symlinks on ramdisk...
followed by
No space left on device.
Looks like the ramdisk fills, and so we end up with
an invalid root disk layout.
Guy.
-
I've downloaded from a few different sites around the world (all English versions). There are two different ISOs, both dated the same day.
KNOPPIX_V3.2-2003-07-25-EN.iso
and
KNOPPIX_V3.2-2003-07-26-EN.iso
but both dated teh 27th. Each gives me the error on boot:
"Kernel panic: No init found. Try passing init= option to kernel"
If the ISO is bad, all the current 3.2 mirrored ISOs are bad. I've tried these CDs on 8 different computers, from Dells and Gateways, to homebuilt clones. Makes no difference what I type to try to pass parameters to it.
Even failsafe has the same error.
This is not a bootable CD.
Hoping for the next (hopefully functional) version.
Similar Threads
-
By Haslemer in forum General Support
Replies: 1
Last Post: 01-03-2005, 08:39 PM
-
By ManiOne in forum General Support
Replies: 1
Last Post: 08-11-2004, 11:36 AM
-
By MrAhmad in forum Customising & Remastering
Replies: 9
Last Post: 01-20-2004, 08:23 PM
-
By fingers99 in forum Hdd Install / Debian / Apt
Replies: 5
Last Post: 10-23-2003, 12:01 AM
-
By tji in forum Customising & Remastering
Replies: 4
Last Post: 06-12-2003, 06:40 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
IBM Power S822 12-Bay Server System Power8 Core 3.42Ghz DVD-Rom Drive 64GB No HD
$399.99
IBM Power 720 POWER7 00E6516 3.6GHz CPU 64GB RAM Server
$209.98
IBM 7944AC1 System x3550 M3 Server 1*Intel Xeon X5650 2.67GHz 4GB SEE NOTES
$27.25
IBM SYSTEM x3200 M2 Server - HDD wiped, No OS
$75.00
IBM Power S822 8284-22A 12SFF Power8 3.89GHz 6-Core 64GB RAM No Bezel/HDD Server
$359.99
IBM Lenovo X3650 M5 2U 8x 2.5ā€¯ CTO Rack Server ā€“ 2x HS, 2x 750W
$199.00
ibm server z series
$16000.00
IBM Server eServer | IBMR1000 | UPS 1000VA 700W W/New Batteries
$115.00
IBM SYSTEM x3650 M4 Xeon E5-2609 2.40GHZ 16GB DDR3-1066MHZ 2x 550W PSU TESTED
$109.95
IBM 8203 E4A p520 Server 8203-E4A 4.2GHz 2-Core POWER6 32GB RAM / NO HDD USED
$99.99