Results 1 to 8 of 8

Thread: Network works on cd, fails after hd install

  1. #1
    Junior Member
    Join Date
    Sep 2003
    Posts
    9

    Network works on cd, fails after hd install

    Hello,

    I have been playing with Knoppix on my laptop (Kiwi OpenNote 810) for some time and finally decided to do a HD install (full install to debian). Everything works fine when I boot off the cd. But, when booting off the hd install, the network never comes up. In watching the boot process, it looks like pcmcia starts ok, then the wireless card is found ok, then knoppix shuts down pcmcia services, continues the boot process and finally attempts to restart pcmcia services. At that point, the card manager appears to exit saying something about the socket being in use.

    Any ideas?

  2. #2
    Senior Member registered user
    Join Date
    Mar 2004
    Posts
    900
    I don't know a great deal about pcmcia and card services but it would be helpful if you posted the output of dmesg

  3. #3
    Member registered user
    Join Date
    Jan 2003
    Posts
    37

    Re: Network works on cd, fails after hd install

    Quote Originally Posted by kpf8655
    Hello,

    I have been playing with Knoppix on my laptop (Kiwi OpenNote 810) for some time and finally decided to do a HD install (full install to debian). Everything works fine when I boot off the cd. But, when booting off the hd install, the network never comes up. In watching the boot process, it looks like pcmcia starts ok, then the wireless card is found ok, then knoppix shuts down pcmcia services, continues the boot process and finally attempts to restart pcmcia services. At that point, the card manager appears to exit saying something about the socket being in use.
    what happens if you open a console and type as root: ifup eth0
    Any ideas?
    More details.

  4. #4
    Junior Member
    Join Date
    Jun 2004
    Posts
    5
    Having the same problem (3.4) - watching the load process the wireless card loads correctly, iwconfig successful, pump works (connection light goes solid),
    .
    .
    .
    then for some reason the card manager is invoked to remove the card !

    Why ?

    Behavior is not reported in dmesg btw
    and iwconfig eth0 says no eth0 !

    I vaugely remember a post about having to edit /etc/networking/interfaces and (re) add the wireless card (eth0 in my case). Is there something in the hdinstall that installs some kind of dynamic config file (re)building that copies over networking/interfaces ?

    km

  5. #5
    Junior Member
    Join Date
    Jun 2004
    Posts
    5
    OK, more info ....

    try to restart pcmcia since that seems to be what brought down the card , no dice - socket error

    ps -ef finds a hanging pump - so I kill it

    NOW I can restart pcmcia, iwconfig shows eth0, key is intact from wireless.config !! ping google, all is OK !

    So what is causing pcmcia to bring down the card after it has sucessfully started ?

    why is there a hanging pump - what is the relationship ?

    no nuttin rite now

  6. #6
    Junior Member
    Join Date
    Jun 2004
    Posts
    5
    Ok, found the culprit - I think.

    /etc/init.d/knoppix-hd-autoconfig - it searches and diffs /etc/network & /etc/pcmcia for changes (since install ?) and if diffs, restarts each.

    So the questions is : is knoppix-hd-autoconfig necessary after a HD install ? It seems it's purpose is to check if there have been changes between the cd install and what is on the hd - isnt that actually expected once it's installed ?? e.g. wireless card reconfig for different networks ?

    Is this because I used Knoppix install instead of Debian ?

  7. #7
    Junior Member
    Join Date
    Jun 2004
    Posts
    5
    Switched install to debian and with a minor edit (again in hd-autoconfig set TYPE=debian vs Beginner),

    all is as expected - wireless works with no extra pumps or kills or iwconfigs

    cool

    now I truly know more

  8. #8
    Member registered user
    Join Date
    Jun 2004
    Posts
    83
    Quote Originally Posted by knowmoor
    now I truly know more
    Hey knowmoor, you may have thought you were talking to yourself there but can I let you know that I also learn't some good stuff from your adventures. Thanks for posting.

Similar Threads

  1. Network works if boot LiveCD--Fails after install & rebo
    By tilleyrw in forum Hardware & Booting
    Replies: 1
    Last Post: 06-19-2005, 01:17 AM
  2. Soundcard autodetection fails in 3.8... but works in 3.7?
    By Junkster in forum Hardware & Booting
    Replies: 15
    Last Post: 06-07-2005, 11:17 PM
  3. Problem with Display - works with 3.4, fails with 3.6
    By bandoba in forum General Support
    Replies: 0
    Last Post: 10-27-2004, 12:43 AM
  4. Network works...then it doesn't
    By CrashedAgain in forum Networking
    Replies: 1
    Last Post: 10-26-2004, 09:28 PM
  5. Network works off CD, not off HD install
    By Corwin in forum Hdd Install / Debian / Apt
    Replies: 2
    Last Post: 04-04-2004, 03:29 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell PowerEdge R640 Server 2x Gold 6150 2.70Ghz 36-Core 256GB 2x 960GB SSD H730P picture

Dell PowerEdge R640 Server 2x Gold 6150 2.70Ghz 36-Core 256GB 2x 960GB SSD H730P

$1737.25



Dell R740XD 24SFF 12 NVMe 2.8Ghz 56-C 192GB H730P 2x10G+2x1G NIC 2x1100W Rails picture

Dell R740XD 24SFF 12 NVMe 2.8Ghz 56-C 192GB H730P 2x10G+2x1G NIC 2x1100W Rails

$5040.07



Dell R740XD 24SFF+4SFF 2.8Ghz 56-C 256GB H740P 10G SFP+ NIC 2x1100W 12x Trays picture

Dell R740XD 24SFF+4SFF 2.8Ghz 56-C 256GB H740P 10G SFP+ NIC 2x1100W 12x Trays

$4704.08



Dell PowerEdge R740xd Server 2x Gold 6140 2.30Ghz 36-Core 512GB H330 picture

Dell PowerEdge R740xd Server 2x Gold 6140 2.30Ghz 36-Core 512GB H330

$2194.80



INTEL XEON GOLD 6148 20 Core SR3B6 2.4GHZ 27.5MB Processor    @24 picture

INTEL XEON GOLD 6148 20 Core SR3B6 2.4GHZ 27.5MB Processor @24

$99.99



Intel Xeon Gold 6138 2.0GHz 27.5MB 20-Core 125W LGA3647 SR3B5 picture

Intel Xeon Gold 6138 2.0GHz 27.5MB 20-Core 125W LGA3647 SR3B5

$46.00



Intel Xeon E5-2690V2 3.00GHz 10-Core (SR1A5) Processor CPU READ DESCRIPTION picture

Intel Xeon E5-2690V2 3.00GHz 10-Core (SR1A5) Processor CPU READ DESCRIPTION

$12.00



Intel Xeon W-2191B 2.3 GHz18 Core (SR3RW)  LGA2066 CPU Processor picture

Intel Xeon W-2191B 2.3 GHz18 Core (SR3RW) LGA2066 CPU Processor

$189.99



HP Workstation Z640 2x Xeon E5-2623V4 32GB Ram 512 SSD Quadro K420 Linux GA picture

HP Workstation Z640 2x Xeon E5-2623V4 32GB Ram 512 SSD Quadro K420 Linux GA

$243.59



Dell Precision 5810 Tower Intel Xeon E5-1603v3 2.8GHz 8GB RAM 500GB HDD W10P GPU picture

Dell Precision 5810 Tower Intel Xeon E5-1603v3 2.8GHz 8GB RAM 500GB HDD W10P GPU

$129.99