Let update-grub do the work for you.
apt-get install grub
grub-install /dev/hda
update-grub
reboot
I installed Knoppix-3.4 to hatd-disk, install with lilo (default) boot works.
I want to try grub boot and have problems getting the kernel options right:
title knoppix-3.4
kernel (hd0,2)/boot/vmlinuz-2.6.5 ramdisk=100000 lang=us apm=power-off atapicd nomce\
ro root=/dev/hda3
module (hd0,2)/boot/initrd.img-2.6.5
which are same (as in lilo.conf) except for ro root=/dev/hda3
The boot messages..
...
RAMDISK: incomplete write (-28 != 3276 4194304
EXT2-fs:hda3: couldn't mount beacause of unsupported optional feaures(4)
Kernel panic:VFS: Unable to mount root fs on /dev/hda3
(hangs here)
Any ideas?
-ishwar
Let update-grub do the work for you.
apt-get install grub
grub-install /dev/hda
update-grub
reboot
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
HPE 843201-001 SMART ARRAY P840ar/2GB 12Gb/s FBWC SAS RAID CONTROLLER BOARD
$345.60
HPE 848147-001 SMART ARRAY P840ar/2GB 12Gb/s FBWC SAS RAID CONTROLLER BOARD
$323.55
HPE 843199-B21 SMART ARRAY P840ar/2GB 12Gb/s FBWC SAS RAID CONTROLLER BOARD
$355.50
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$35.96
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$86.99
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
Yottamaster 5 Bay RAID Hard Drive Enclosure USB3.1 Type C 2.5"/3.5" SATA HDD SSD
$142.49