Let update-grub do the work for you.
apt-get install grub
grub-install /dev/hda
update-grub
reboot
I installed Knoppix-3.4 to hatd-disk, install with lilo (default) boot works.
I want to try grub boot and have problems getting the kernel options right:
title knoppix-3.4
kernel (hd0,2)/boot/vmlinuz-2.6.5 ramdisk=100000 lang=us apm=power-off atapicd nomce\
ro root=/dev/hda3
module (hd0,2)/boot/initrd.img-2.6.5
which are same (as in lilo.conf) except for ro root=/dev/hda3
The boot messages..
...
RAMDISK: incomplete write (-28 != 32764194304
EXT2-fs:hda3: couldn't mount beacause of unsupported optional feaures(4)
Kernel panic:VFS: Unable to mount root fs on /dev/hda3
(hangs here)
Any ideas?
-ishwar
Let update-grub do the work for you.
apt-get install grub
grub-install /dev/hda
update-grub
reboot
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
Hynix 2x 8GB (16GB) PC4-19200 DDR4-2400MHz 288Pin Desktop Memory Module
$18.99
Kingston 16GB 2Rx8 PC4-2400T-SB1-11 Laptop Memory K821PJ-MID Tested Working
$17.99
Samsung 16GB 2Rx8 PC4-2400T-SE1-11 Laptop Memory M471A2K43CB1-CRC Tested Working
$17.99
Micron 16GB 2Rx8 PC4-2400T-SE1-11 Laptop Memory MTA16ATF2G64HZ-2G3E1 Tested
$17.99
Micron 8GB DDR4 1Rx16 PC4-3200AA Laptop RAM Memory MTA4ATF1G64HZ-3G2E2
$10.00
Crucial DDR3L 16GB 1600 2x 8GB PC3-12800 Laptop SODIMM Memory RAM PC3 16G DDR3
$13.50
Team T-FORCE VULCAN Z 32GB (2 x 16GB) PC RAM DDR4 3200 (PC4 25600) Memory
$54.99
A-Tech 128GB 4x 32GB 2Rx4 PC4-19200R DDR4 2400 ECC REG RDIMM Server Memory RAM
$191.96
CORSAIR Vengeance RGB Pro 32GB (2 x 16GB) 288-Pin PC RAM DDR4 3600 (PC4 28800)
$77.95