Let update-grub do the work for you.
apt-get install grub
grub-install /dev/hda
update-grub
reboot
I installed Knoppix-3.4 to hatd-disk, install with lilo (default) boot works.
I want to try grub boot and have problems getting the kernel options right:
title knoppix-3.4
kernel (hd0,2)/boot/vmlinuz-2.6.5 ramdisk=100000 lang=us apm=power-off atapicd nomce\
ro root=/dev/hda3
module (hd0,2)/boot/initrd.img-2.6.5
which are same (as in lilo.conf) except for ro root=/dev/hda3
The boot messages..
...
RAMDISK: incomplete write (-28 != 3276 4194304
EXT2-fs:hda3: couldn't mount beacause of unsupported optional feaures(4)
Kernel panic:VFS: Unable to mount root fs on /dev/hda3
(hangs here)
Any ideas?
-ishwar
Let update-grub do the work for you.
apt-get install grub
grub-install /dev/hda
update-grub
reboot
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB
$2699.99
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6134 64C 1TB
$3299.99
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM
$1419.00
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG
$69.99
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
HP ProLiant BL460c Server Blade (2 x CPU) 24GB RAM/No Drives
$45.60
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
Dell PowerEdge M620 Blade Server
$39.99
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99