Let update-grub do the work for you.
apt-get install grub
grub-install /dev/hda
update-grub
reboot
I installed Knoppix-3.4 to hatd-disk, install with lilo (default) boot works.
I want to try grub boot and have problems getting the kernel options right:
title knoppix-3.4
kernel (hd0,2)/boot/vmlinuz-2.6.5 ramdisk=100000 lang=us apm=power-off atapicd nomce\
ro root=/dev/hda3
module (hd0,2)/boot/initrd.img-2.6.5
which are same (as in lilo.conf) except for ro root=/dev/hda3
The boot messages..
...
RAMDISK: incomplete write (-28 != 3276 4194304
EXT2-fs:hda3: couldn't mount beacause of unsupported optional feaures(4)
Kernel panic:VFS: Unable to mount root fs on /dev/hda3
(hangs here)
Any ideas?
-ishwar
Let update-grub do the work for you.
apt-get install grub
grub-install /dev/hda
update-grub
reboot
Seagate 10TB 7200RPM 12Gbps 3.5in SAS Hard Drive ST10000NM096
$79.99
Seagate Exos 7E10 ST2000NM000B 2TB 7200RPM SATA 6.0Gb/s 3.5" Internal Hard Drive
$29.99
Dell ST2000NX0403 2T SATA 2.5 inch 7.2K CK3MN server hard drive
$45.00
Toshiba 4TB, SATA 3, 3.5'' Internal Hard Drive (MG03ACA400)
$48.00
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$89.99
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$93.88
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
HGST Ultrastar HE10 HUH721010ALE600 10TB SATA 6Gb/s 7200RPM 3.5" Enterprise HDD
$69.99
Western Digital WD10JUCT 1TB 2.5" SATA 3Gb/s 5400 RPM 16MB Laptop Hard Drive
$17.98
HGST 0F27352 10TB 3.5" SAS 7200 RPM 12Gb/s Hard Drive 100% #73 v
$65.00