Results 1 to 2 of 2

Thread: boot problem Knoppix 3.4 on Samsung P30

  1. #1
    Junior Member
    Join Date
    Jun 2004
    Posts
    1

    boot problem Knoppix 3.4 on Samsung P30

    Hi,

    when I try to boot Knoppix 3.4., my laptop (Samsung P30) hangs up every time.
    The boot option "failsafe" works, but ONLY with Kernel 2.4; knoppix26 failsafe hangs too.......... I already tried various "noXXX" boot options, but without any success.
    The interesting point is that Knoppix 3.3 boots without problems (well, there's one error message after the Autoconfigure device process stating "moduel super-blocker-2 not found"), but this doesn't not stop the booting process and I don't see any negative influence on working with Knoppix 3.3.

    Anybody any ideas?

    Jochen

  2. #2
    Junior Member
    Join Date
    Jul 2004
    Posts
    1
    Hi,
    I have the same problem, but the curiosity is that it works sometimes if i try enough - whatever, i installed knoppix 3.3 and it works fine, but it doesn't support battery status display.
    For this reason i compiled a patched kernel 2.4.26 today. I configured it to use acpi and apm to get running KLaptop. Then i rebooted and everythings went well (with running KLaptop). After the second reboot my samsung p30 hangs with this last message:

    ACPI: IRQ9 SCI: Edge set to Level Trigger.

    Thus i think it could have something to do with acpi, because in knoppix 3.4 the kernel is compiled with acpi support for laptops.

    Daniel

Similar Threads

  1. Samsung X30 - Wide XGA Display
    By andreas2000 in forum Laptops
    Replies: 2
    Last Post: 07-23-2006, 06:56 AM
  2. Samsung SynchMaster 172N LCD and Nvidia 5900 Geforce
    By ricesteam in forum Hardware & Booting
    Replies: 1
    Last Post: 04-06-2005, 12:43 PM
  3. Knoppix will not boot with Samsung LCD and Radeon 7000
    By iland in forum General Support
    Replies: 6
    Last Post: 09-20-2004, 08:45 AM
  4. Samsung 1204H (120GB) and Kernel 2.6: no partitions
    By bernd_b in forum Hardware & Booting
    Replies: 0
    Last Post: 02-12-2004, 12:20 PM
  5. USB Driver for Samsung Cell Phone to laptop
    By seth niren in forum General Support
    Replies: 0
    Last Post: 11-23-2003, 06:00 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


IBM Power8 S822L Storage Server 8247-22L - With Ram, Some Cards, No HDD's picture

IBM Power8 S822L Storage Server 8247-22L - With Ram, Some Cards, No HDD's

$399.95



IBM 8284-22A S822 Dual Power8 Cpu 512Gb (16x 32Gb) RAM  picture

IBM 8284-22A S822 Dual Power8 Cpu 512Gb (16x 32Gb) RAM

$795.00



IBM SYSTEM X3500 M3 SERVER 7380AC1 2*XEON E5620 2.4GHz 8GB SEE NOTES picture

IBM SYSTEM X3500 M3 SERVER 7380AC1 2*XEON E5620 2.4GHz 8GB SEE NOTES

$33.21



IBM x3650 M4 2x Xeon E5-2670 2.6ghz 16-Core / 64GB / M5110e / 2x PSU picture

IBM x3650 M4 2x Xeon E5-2670 2.6ghz 16-Core / 64GB / M5110e / 2x PSU

$129.99



IBM Power S822 12-Bay Server System Power8 Core 3.42Ghz DVD-Rom Drive 64GB No HD picture

IBM Power S822 12-Bay Server System Power8 Core 3.42Ghz DVD-Rom Drive 64GB No HD

$399.99



Dell PowerEdge R730xd 24B SFF 2U Xean E5-2690 V4 2.6 ghz 28-cores 4x 1.2 TB picture

Dell PowerEdge R730xd 24B SFF 2U Xean E5-2690 V4 2.6 ghz 28-cores 4x 1.2 TB

$500.00



IBM Power S822 8284-22A 12SFF Power8 3.89GHz 6-Core 64GB RAM No Bezel/HDD Server picture

IBM Power S822 8284-22A 12SFF Power8 3.89GHz 6-Core 64GB RAM No Bezel/HDD Server

$359.99



IBM Lenovo X3650 M5 2U 8x 2.5” CTO Rack Server – 2x HS, 2x 750W picture

IBM Lenovo X3650 M5 2U 8x 2.5” CTO Rack Server – 2x HS, 2x 750W

$199.00



IBM 8203 E4A p520 Server 8203-E4A 4.2GHz 2-Core POWER6 32GB RAM / NO HDD USED picture

IBM 8203 E4A p520 Server 8203-E4A 4.2GHz 2-Core POWER6 32GB RAM / NO HDD USED

$119.99



IBM System X 3250 M5 Single Xeon Quad Core E3-1220 v3 @3.1GHz,8GB RAM,Linux SUSE picture

IBM System X 3250 M5 Single Xeon Quad Core E3-1220 v3 @3.1GHz,8GB RAM,Linux SUSE

$199.87