Hi:
I have installed knoppix 3.4 on my hard disk. I tryed to install IBM DB2 following some instructions I found on a web. I did this:
Then tryed to install if, but it didn't work. After installing it (if you can) You have to restore this changes doing this:Code:bash# mv /bin/sh /bin/sh.bash bash# ln -s /usr/bin/ksh /bin/sh bash# for f in awk basename ksh passwd sort touch; do ln -s /usr/bin/$f /bin/$f; done
But I did this and when I restarted knoppix it goes to:Code:bash# ln -sf /usr/bin/bash /bin/sh
So how can I restore my system working. I have tryed coping /etc/bin/sh from the knoppix cd but it doesn't worked.INIT: version 2.78-knoppix booting
INIT:cannot execute "etc/init.d/rcS"
INIT:entering runlevel 5
INIT:cannot execute "etc/init.d/rc"
The other question I want to know is how can I unistall a package that doesn't wont to configure. I have tryied doing:
or doingCode:dpkg -i --force-all /var/cache/apt/archives/locales.deb
but it doesn't work.Code:dpkg --configure -a
Thanks in advance. The first question is so important, so if someone could answer it it would be very, very useful.
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$269.99
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
DELL POWEREDGE T430 SERVER W/ DUAL XEON E5-2609 CPU & 16GB MEMORY
$329.00
CTO Dell PowerEdge R630 Server, 2x Xeon E5-2620V4, 64GB- 512GB RAM, 480GB SSDs
$246.67
Dell PowerEdge R620 4-Bay Server 2x Xeon E5-2690 8 Core 2.9GHz 32GB No HDD H710P
$95.63
DELL PowerEdge R630 8SFF Server 2x E5-2690v4 2.6GHz =28 Cores 256GB H730 4xRJ45
$600.00
Dell PowerEdge R620 Server 2x E5-2650 V2 = 16 Cores H710P 128GB RAM 2x 600GB SAS
$274.99