-
06-16-2005, 05:30 PM
#231
Re: Creation of Minirt_ntfs.gz
![Quote](images/misc/quote_icon.png)
Originally Posted by
ruymbeke
![Quote](images/misc/quote_icon.png)
Originally Posted by
bswinburne
Hi All,
I have been following this thread for a while, it has been quite a journey. I think these live Cds are a great way forward, especially when they can be place don a hd and boot from iso. I was wondering if it would be possible for someone to post consolidated instructions on how to create a minirt_ntfs.gz for a knoppix distro and maybe even others such as kanotix. An earlier post alluded to what is necessary but did not go into enough detail. I'm fairly new to this sort of stuff but I would like to get envolved. Best Regards, Brian
I wish I would have the time to do that. If you know how to access the inside of the initrd file and understand how to patch a linuxrc script, it is quite simple to update the kernel drivers and other tools (busybox, mount,...) to make a ntfs/fromiso version of a initrd file. But a generic step by step instruction procedure is quite hard to write. It is almost a case to case basis, but I will do my best to provide updates ... Cheers, Gilles
OK, I understand, thanks for taking the time to reply.
Regards
Brian
-
06-20-2005, 09:39 AM
#232
Hi, I'd like to tell you that I succed boot Knoppix form NTFS, my PC is Acer Travelmate 230 and my HD (all NTFS):
C: hda1 , WindowsXP
D: hda5
E: hda6 , which hold the "knoppix.iso" image file
F: hda7
G: hda8
You need to boot with Grub ,edit "boot.ini" as a lot manual says, and the most important is you need to replace the "initrd" file with NTFS supported.
I am sorry I forget where did I got the file, but just in this forum, just search.
PS: the file may boot Knoppix up to version 3.8.1, and what I have is a 3.9 image, so I couldn't shutdown my laptop properly
-
06-20-2005, 09:51 AM
#233
![Quote](images/misc/quote_icon.png)
Originally Posted by
cpeter
...PS: the file may boot Knoppix up to version 3.8.1, and what I have is a 3.9 image, so I couldn't shutdown my laptop properly
If you read carefully my previous posts, you will find:
Actually my 3.8.2 minird_ntfs file also works with 3.9 !!!
...
So to summarize, use the new 3.9 kernel and iso file with the 3.8.2 initrd_ntfs file included in: http://s119307663.onlinehome.us/Knoppix382.zip
Cheers, Gilles
-
06-20-2005, 09:59 AM
#234
![Quote](images/misc/quote_icon.png)
Originally Posted by
ruymbeke
![Quote](images/misc/quote_icon.png)
Originally Posted by
cpeter
...PS: the file may boot Knoppix up to version 3.8.1, and what I have is a 3.9 image, so I couldn't shutdown my laptop properly
If you read carefully my previous posts, you will read:
Actually my 3.8.2 minird_ntfs file also works with 3.9 !!!
...
So to summarize, use the new 3.9 kernel and iso file with the 3.8.2 initrd_ntfs file included in:
http://s119307663.onlinehome.us/Knoppix382.zip
Cheers, Gilles
THX very much!
And the initrd file download url : http://s119307663.onlinehome.us/grube.zip
PS: Could you please tell me what's the principle of your "intrd_ntfs"? That will be very nice of you.
-
06-23-2005, 07:17 AM
#235
http://s119307663.onlinehome.us/grube.zip contains the base PMI files and the kernel/initrd files for knoppix 3.6,3.7,3.81
http://s119307663.onlinehome.us/Knoppix382.zip only contain the kernel/initrd files for knoppix 3.82,3.9 (same files)
![Quote](images/misc/quote_icon.png)
Originally Posted by
cpeter
...Could you please tell me what's the principle of your "intrd_ntfs"? That will be very nice of you.
As I said previously, I wish I would have the time to do that. If you know how to access the inside of the initrd file and understand how to patch a linuxrc script, it is quite simple to update the kernel drivers and other tools (busybox, mount,...) to make a ntfs/fromiso version of a initrd file. But a generic step by step instruction procedure is quite hard to write. It is almost a case to case basis, but I will do my best to provide updates. BTW I am currently downloading knoppix DVD 4.0... Cheers, Gilles
-
06-24-2005, 10:18 AM
#236
Problems with GLDR under W2K
Hi,
I've just downloaded and installed the WinPartion PMI with Knoppix 3.8.1 on my Desktop PC under Win XP Pro there was no problem. I am able to choose and start Knoppix 3.8.1 from ISO the file in my C:\BOOT\Knoppix3.81 folder.
On my Notebook (SONY C1 VE) under W2K however, following exact the same schema there is a problem - choosing Start Grub restarts the notebook after some seconds with only blinking cursor on top left of the screen, no grub menu is shown. Adding and choosing the "OLD METHOD" shows nothing - screen is black (PC hangs?) only reset helps.
What am I doing wrong? Please help
Best Regards
Emil Tchekov
-
06-24-2005, 11:01 AM
#237
Re: Problems with GLDR under W2K
![Quote](images/misc/quote_icon.png)
Originally Posted by
emiltcho
... On my Notebook (SONY C1 VE) under W2K however, following exact the same schema there is a problem - choosing Start Grub restarts the notebook after some seconds with only blinking cursor on top left of the screen, no grub menu is shown. Adding and choosing the "OLD METHOD" shows nothing - screen is black (PC hangs?) only reset helps. What am I doing wrong? Please help Best Regards Emil Tchekov
Could you please try this http://s119307663.onlinehome.us/grldr and let me know ? Thanks, Gilles
-
06-24-2005, 11:38 AM
#238
Re: Problems with GLDR under W2K
Hi again (thank you very much for your help),
Downloaded http://s119307663.onlinehome.us/grldr (137 KB) and replaced the "old" one (171 KB). Got the same effect as by choosing the "Old method" - no more restarts, but hangs on black screen with no message/cursor, only reset helps.
Regards
Emil
-
06-25-2005, 02:18 PM
#239
Re: Problems with GLDR under W2K
Hi again,
this seems to be a deeper going problem.
I have installed Win XP Pro on my C1VE and GLDR still not work. Other laptop with same gldr problem under W2K, was able after upgrade to XP pro to boot Knoppix from iso without other changes.
Regards
Emil Tchekov
-
07-19-2005, 10:18 AM
#240
Knoppix 4.0 minirt_ntfs.gz
Finally I got the Knoppix 4.0 minirt_ntfs.gz (almost) working !
http://s119307663.onlinehome.us/k40.zip
It boots properly but not all applications are there yet.
I still have a small bug to fix in the linuxrc script which prevent the second KNOPPIX2 cloop to load.
Please be very careful with the "casing" of the ISO path used in the grub menu.lst,
it has to match the Knoppix ISO filename, see my grub menu.lst:
bootfrom=.../boot/knoppix.40/*.ISO (previous knoppix releases were using .../boot/knoppix.39/*.iso)
I will try to post an update asap.
Please give me some feedback.
Cheers, Gilles
Similar Threads
-
By sandricionut in forum Hardware & Booting
Replies: 2
Last Post: 08-11-2005, 03:28 PM
-
By cli168 in forum Hdd Install / Debian / Apt
Replies: 3
Last Post: 06-20-2005, 03:57 AM
-
By Ish Rattan in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 06-25-2004, 10:31 PM
-
By madape in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 02-03-2004, 10:07 AM
-
By keava in forum General Support
Replies: 3
Last Post: 10-20-2003, 05:24 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 240GB SSD 2x 10GBE picture](/store/img/g/7KoAAOSwephiKTf4/s-l225/1U-Supermicro-Server-10-Bay-2x-Intel-Xeon-3-3Ghz-8.jpg)
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 240GB SSD 2x 10GBE
$259.00
![1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports picture](/store/img/g/fxsAAOSwZD5l6PSG/s-l225/1U-BareMetal-pfsense-opnsense-Router-Firewall-DNS-.jpg)
1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports
$149.00
![Supermicro 1U Server X9SRI-F Xeon E5-2640 v2 2.5Ghz 16-Cores / 64GB / No HDD picture](/store/img/g/aYkAAOSwLGpmYf9P/s-l225/Supermicro-1U-Server-X9SRI-F-Xeon-E5-2640-v2-2-5Gh.jpg)
Supermicro 1U Server X9SRI-F Xeon E5-2640 v2 2.5Ghz 16-Cores / 64GB / No HDD
$149.99
![HPE ProLiant MicroServer Gen10 picture](/store/img/g/tb4AAOSwpRxmfLpK/s-l225/HPE-ProLiant-MicroServer-Gen10.jpg)
HPE ProLiant MicroServer Gen10
$420.00
![Supermicro Server 505-2 Intel 2.4GHz 16GB SYS-5018A-FTN4 - pfSense Compatible picture](/store/img/g/JDMAAOSwC91mR849/s-l225/Supermicro-Server-505-2-Intel-2-4GHz-16GB-SYS-5018.jpg)
Supermicro Server 505-2 Intel 2.4GHz 16GB SYS-5018A-FTN4 - pfSense Compatible
$220.48
![HP ProLiant MicroServer Generation 8 Xeon 4gb 4-BAY 2x500GB HDD (included) picture](/store/img/g/bzsAAOSwEYxmf3N2/s-l225/HP-ProLiant-MicroServer-Generation-8-Xeon-4gb-4-BA.jpg)
HP ProLiant MicroServer Generation 8 Xeon 4gb 4-BAY 2x500GB HDD (included)
$200.00
![HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon picture](/store/img/g/eHkAAOSwVbBmJhq0/s-l225/HPE-ProLiant-MicroServer-Gen10-Plus-v2-Ultra-Micro.jpg)
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$846.48
![HP HPE Microserver Gen 7 8 9 iLO 2/3/4/5Advanced License Lifetime Key| FAST SHIP picture](/store/img/g/jMgAAOSwlnhk2TU3/s-l225/HP-HPE-Microserver-Gen-7-8-9-iLO-2-3-4-5Advanced-L.jpg)
HP HPE Microserver Gen 7 8 9 iLO 2/3/4/5Advanced License Lifetime Key| FAST SHIP
$10.00
![Super micro Server picture](/store/img/g/PNgAAOSweU1mSkvR/s-l225/Super-micro-Server.jpg)
Super micro Server
$168.00
![Supermicro 2U Server 12 Caddy Bay 3.5 LFF E ATX Storage Chassis SAS2 6GBPS Rail picture](/store/img/g/1ksAAOSwuqhhuPcE/s-l225/Supermicro-2U-Server-12-Caddy-Bay-3-5-LFF-E-ATX-St.jpg)
Supermicro 2U Server 12 Caddy Bay 3.5 LFF E ATX Storage Chassis SAS2 6GBPS Rail
$199.00