Hi Utu,
Please try the following command: "cpio -ivu --no-absolute-filenames < minirt.gz"
Best Regards,
Gilles
Hi Utu,
Yes you are correct. I was going a little too fast... Something like this works better:
gunzip -c minirt.gz | cpio -ivu --no-absolute-filenames
Best Regards,
Gilles
Thanks again, Gilles.
There's a lot to study here.
Hello,
Please below the link to the improved minirt for 742 with nfs, samba and vm boot support:
http://s94002264.onlinehome.us/grub/k742/minirt_742.gz (please use "save as")
I am still working on a vm with 3d support... but please find below a VMware 11 tools cloop for 742:
http://s94002264.onlinehome.us/grub/k742/vmt2305329
Best Regards,
Gilles
Last edited by ruymbeke; 01-31-2015 at 02:28 PM.
Hello,
Please find below the latest Knoppix 7.5.0 minirt for nfs, samba and iso boots (32 & 64):
http://s94002264.onlinehome.us/grub/k750/minirt_750.gz (14MB)
and the latest VMware 11.1.0 virtual machine guest zipped with 32/64 bits boot, 3D and optional data persistence
http://s94002264.onlinehome.us/grub/vmk750_2496824.zip (59.6MB)
Please provide some feedback.
Best Regards,
Gilles
PS: Please find below a link to the VMware 9.9.2 tools cloop file also used in the above vm:
http://s94002264.onlinehome.us/grub/k750/vmt2496824 (25.6MB)
cf: http://knoppix.net/forum/threads/313...371#post132371
Last edited by ruymbeke; 05-09-2015 at 03:58 AM. Reason: edited vm size
Hello,
Please find below the latest Knoppix 7.7.0 minirt for nfs, samba and iso boots (32 & 64):
http://s94002264.onlinehome.us/grub/k770/minirt_770.gz (16MB)
and the latest VMware 12.1.1 virtual machine guest zipped with 32/64 bits boot, 3D and optional data persistence
http://s94002264.onlinehome.us/grub/vmk770_3770994.zip (63.6MB)
Please provide some feedback.
Best Regards,
Gilles
PS: Please find below a link to the VMware Tools 10.0.6 cloop file also used in the above vm:
http://s94002264.onlinehome.us/grub/k770/vmt3770994 (33.6MB)
PS2: you may notice that in order to get the cut & paste and drag & drop between the guest and the host
working properly the file /etc/vmware-tools/vmware-user.desktop had to be modified as follow:
Exec=/usr/bin/vmware-user ==> Exec=env VMWARE_USE_SHIPPED_LIBS=1 /usr/bin/vmware-user
Last edited by ruymbeke; 07-29-2016 at 07:49 AM.
Hello,
Please find below the latest Knoppix 7.7.1 minirt for nfs, samba and iso boots (32 & 64):
http://s94002264.onlinehome.us/grub/k771/minirt_771.gz (16.8MB)
and the latest VMware 12.5.2 virtual machine guest zipped with 32/64 bits boot, 3D and optional data persistence
http://s94002264.onlinehome.us/grub/vmk771_4352439.zip (68.9MB)
Please provide some feedback.
Best Regards,
Gilles
PS: Please find below a link to the VMware Tools 10.0.6 cloop file also used in the above vm:
http://s94002264.onlinehome.us/grub/k770/vmt4352439 (34.7MB)
PS2: to avoid mouse problems with the automatic grab/ungrab feature
not automatically grabing input when cursor enters the window
it was necessary to add to the VMware config file (.vmx) the following lines:
mouse.vusb.enable = "TRUE"
mouse.vusb.useBasicMouse = "FALSE"
cf: https://wiki.archlinux.org/index.php...rch_as_a_guest
Thank you very much Gilles!
Just a question: Is there any relatively simple way to make 7.7.1 run under VMware WS 10.X? (That's what I have got running under Debian Jessie.)
Cisco Meraki MA-SFP-1GB-SX 1000BASE-SX SFP Transceiver Module
$24.99
Cisco GLC-FE-100FX-RGD 100BASE-FX SFP Transceiver Module
$17.99
Cisco GLC-GE-100FX 100BASE-FX SGMII SFP Transceiver Module
$83.99
Cisco SFP-10/25G-CSR-S 10/25GBASE-CSR SFP28, 850nm, 100m, LC,
$54.00
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
SFP-10G-SR Original Cisco 10GBASE-SR SFP+ V02 Multi mode Transceiver 10-2415-02
$5.00
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$13.89
Lot of 10 - HP 10Gb SR SFP+ Transceiver 455883-B21 455885-001 456096-001 850nm
$23.99
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$89.00
SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module
$6.80