Page 71 of 72 FirstFirst ... 216169707172 LastLast
Results 701 to 710 of 716

Thread: ISO boot from FAT/NTFS/USB (GRUB.exe, grldr from boot.ini)

  1. #701
    Senior Member registered user
    Join Date
    Sep 2006
    Posts
    802
    Quote Originally Posted by ruymbeke View Post
    Hi Capricorny,
    Did you just try to edit the vmk771.vmx file and replace virtualHW.version = "12" by virtualHW.version = "10" ?
    I did not try your exact configuration but this should be ok. Could you please let us know if this works ?
    Thanks,
    Gilles
    Thanks for the suggestion. I will try this out as soon as I get time for it, and report the outcome. I also tried an ordinary install of 7.7.1 under Workstation 10.X, using flash-knoppix. Seems to work fine, but I won't go further along that line until I have a remastered ISO to start from. Knoppix ran just fine with the 64-bit kernel. The host, Debian Jessie, runs with 3.16 kernel as default.

  2. #702
    Moderator Moderator
    Join Date
    Mar 2004
    Location
    Menlo Park, California
    Posts
    674

    Knoppix 8.0.0 as a VMware 12.5.5 virtual machine guest with 3D & optional persistence

    Hello,
    Please find below the latest Knoppix 8.0.0 minirt for nfs, samba and iso boots (32 & 64):
    http://s94002264.onlinehome.us/grub/k800/minirt_800.gz (17.7MB)
    and the VMware 12.5.2 virtual machine guest zipped with 32/64 bits boot, 3D and optional data persistence
    http://s94002264.onlinehome.us/grub/vmk800_4352439.zip (63.4MB)
    As usual feedbacks are always welcome.
    Best Regards,
    Gilles

    PS: Please find below the last working VMware Tools 10.0.6 cloop file (also used for Knoppix 7.7.1):
    http://s94002264.onlinehome.us/grub/k800/vmt4352439 (34.7MB)
    For some unknown reason the latest vmware tools distributed with VMware 12.5.5 cannot be installed properly.
    But the older vmware tools installed in the above vm guest do work just fine also with the latest VMware 12.5.5.
    I am still trying to understand why the latest tools cannot be installed as I am getting the error message below.
    Please let me know if you have a solution.

    ...
    Making sure services for VMware Tools are stopped.

    Failed to stop vmware-tools.service: Unknown unit: vmware-tools.service
    See system logs and 'systemctl status vmware-tools.service' for details.
    Failed to get load state of vmware-tools.service: No such property 'LoadState'
    Unable to stop services for VMware Tools

    Execution aborted.
    Last edited by ruymbeke; 05-04-2017 at 06:21 PM.

  3. #703
    Moderator Moderator
    Join Date
    Mar 2004
    Location
    Menlo Park, California
    Posts
    674

    Knoppix 8.0.0 as a VMware 12.5.5 virtual machine guest with 3D & optional persistence

    Hello,
    Please find below the latest Knoppix 8.0.0 minirt for nfs, samba and iso boots (32 & 64):
    http://s94002264.onlinehome.us/grub/k800/minirt_800.gz (17.7MB)
    the VMware 12.5.5 build-5234757 virtual machine guest zipped with 32/64 bits boot, 3D and optional data persistence
    http://s94002264.onlinehome.us/grub/vmk800_5234757.zip (67.6MB)
    and the Vmware Tools 10.1.6-5214329 cloop file:
    http://s94002264.onlinehome.us/grub/k800/vmt5234757 (39.1MB)
    As usual feedbacks are always welcome.
    Best Regards,
    Gilles

    PS: the work around to install the latest VMware Tools 12.5.5 is to use the option
    --skip-stop-start when starting the vmware-config-tools.pl
    in order to avoid the following error: (cf: https://communities.vmware.com/thread/561909)

    ...
    Making sure services for VMware Tools are stopped.

    Failed to stop vmware-tools.service: Unknown unit: vmware-tools.service
    See system logs and 'systemctl status vmware-tools.service' for details.
    Failed to get load state of vmware-tools.service: No such property 'LoadState'
    Unable to stop services for VMware Tools

    Execution aborted.

  4. #704
    Member registered user
    Join Date
    Mar 2010
    Location
    USA
    Posts
    50
    Where can I get a copy of 8.0? It seems silly to invest lots of time working with 7.7.1 if its being replaced soon.

    Thanks...

  5. #705
    Moderator Moderator
    Join Date
    Mar 2004
    Location
    Menlo Park, California
    Posts
    674

    Knoppix 8.0.1 as a VMware 12.5.7 virtual machine guest with 3D & optional persistence

    Hello,
    Please find below the latest Knoppix 8.0.1 minirt for nfs, samba and iso boots (32 & 64):
    http://s94002264.onlinehome.us/grub/k801/minirt_801.gz (19MB)
    the VMware 12.5.7 build-5813279 virtual machine guest zipped with 32/64 bits boot, 3D and optional data persistence
    http://s94002264.onlinehome.us/grub/vmk801_5813279.zip (70.9MB)
    and the Vmware Tools 10.1.6-5214329 cloop file:
    http://s94002264.onlinehome.us/grub/k801/vmt5234757 (39.1MB)
    As usual feedbacks are always welcome.
    Best Regards,
    Gilles

    PS: as before the work around to install the latest VMware Tools 12.5.7
    is to use the option --skip-stop-start when starting the vmware-config-tools.pl
    in order to avoid the error: https://communities.vmware.com/thread/561909
    Last edited by ruymbeke; 10-07-2017 at 01:37 AM.

  6. #706
    Moderator Moderator
    Join Date
    Mar 2004
    Location
    Menlo Park, California
    Posts
    674

    Knoppix 8.3.0 network boot minirt and vmware tools

    Hello,
    Please find below the latest Knoppix 8.3.0 minirt for nfs, samba and iso boots (32 & 64):
    http://s94002264.onlinehome.us/grub/k830/minirt_830.gz (21.4MB)
    and the VMware tools 10.2.5-8068393 cloop file:
    http://s94002264.onlinehome.us/grub/k830/vmt8497320 (36.4MB)
    As usual feedback is always welcome.
    Best Regards,
    Gilles

  7. #707
    Moderator Moderator
    Join Date
    Mar 2004
    Location
    Menlo Park, California
    Posts
    674

    Knoppix 8.5.0 network boot minirt and vmware tools

    Hello,
    Please find below the latest Knoppix 8.5.0 minirt for nfs, samba and iso boots (32 & 64):
    http://s94002264.onlinehome.us/grub/k850/minirt_850.gz (21.2MB)
    and the VMware tools 10.3.2-9925305 cloop file:
    http://s94002264.onlinehome.us/grub/k850/vmt12990004 (36.8MB)
    As usual feedbacks are always welcome.
    Best Regards,
    Gilles

  8. #708
    Moderator Moderator
    Join Date
    Mar 2004
    Location
    Menlo Park, California
    Posts
    674

    Knoppix 8.6.1 as a VMware 15.1.0 virtual machine guest with 3D & optional persistence

    Hello,
    Please find below the latest Knoppix 8.6.1 minirt for nfs, samba and iso boots (32 & 64):
    http://s94002264.onlinehome.us/grub/k861/minirt_861.gz (21.9MB)
    The VMware 15.1.0 build 13591040 virtual machine guest zipped with 32/64 bits boot,
    3D and optional data persistence
    http://s94002264.onlinehome.us/grub/vmk861_13591040.zip (70.9MB)
    and the VMware tools 10.3.10-12406962 cloop file:
    http://s94002264.onlinehome.us/grub/k861/vmt13591040 (36.7MB)
    As usual feedback is always welcome.
    Best Regards,
    Gilles
    Last edited by ruymbeke; 11-28-2019 at 11:36 PM.

  9. #709
    Moderator Moderator
    Join Date
    Mar 2004
    Location
    Menlo Park, California
    Posts
    674

    Knoppix 9 minirt with nfs cifs nvme iso boot & VMware 16 tools

    Hello,
    Please find below the latest Knoppix 9 minirt for nfs, samba and iso boots (32 & 64):
    http://s94002264.onlinehome.us/grub/k900/minirt_900.gz (23.5MB)
    The VMware tools 10.3.10-12406962 cloop file:
    http://s94002264.onlinehome.us/grub/k900/vmt15785246 (37.8MB)
    As usual feedback is always welcome.
    Best Regards,
    Gilles

  10. #710
    Senior Member otropogo's Avatar
    Join Date
    Jul 2008
    Posts
    109

    minirt_900.gz checksum, size, function, etc.

    Have downloaded minirt_900.gz in the faint hope that it will somehow lead me to a way of obtaining Knoppix 9.0. Have run into two issues so far.

    1. whereas your post gives the download size of minirt_900.gz as 23.5MB, Windows file manager gives te size as 63.7 MB (66,866,176 bytes)

    2. I've searched for the meaning of minirt with Duckduckgo, but the only hit is your post above, so I still have no idea what this file contains or is meant to do

    3. I don't have a hash or checksum to test the integrity of the file.

    PS. I have a (somewhat) working copy of Knoppix 8.6.1 At least, it boots reliably from flash, but has a fatal flaw it shares with the last six or more versions - Synaptic doesn't work, and I haven't found a way to fix or replace its function. So there is no way to install or update any apps, including virus signatures for Clamv.

    I've also been unable to use my desktop monitor with any variants of Knoppix 7.xxx or 8.xxx (the display will not size to fit, so no functions are accessible via gui) and am forced to use my laptop's screen. This is why I keep looking for the latest version, in the faint hope that these issues will have been fixed.

Page 71 of 72 FirstFirst ... 216169707172 LastLast

Similar Threads

  1. Boot Knoppix 3.3 from HDD using Grub for NTFS
    By sandricionut in forum Hardware & Booting
    Replies: 2
    Last Post: 08-11-2005, 03:28 PM
  2. grub boot loader read the boot file from a windows partition
    By cli168 in forum Hdd Install / Debian / Apt
    Replies: 3
    Last Post: 06-20-2005, 03:57 AM
  3. Hdd-install and grub boot??
    By Ish Rattan in forum Hdd Install / Debian / Apt
    Replies: 1
    Last Post: 06-25-2004, 10:31 PM
  4. Grub/lilo boot problems
    By madape in forum Hdd Install / Debian / Apt
    Replies: 2
    Last Post: 02-03-2004, 10:07 AM
  5. Boot cd with lilo or grub boot disk
    By keava in forum General Support
    Replies: 3
    Last Post: 10-20-2003, 05:24 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


HP ProLiant MicroServer Gen8 Server Xeon E3-1220L 16GB RAM No HDD's picture

HP ProLiant MicroServer Gen8 Server Xeon E3-1220L 16GB RAM No HDD's

$299.00



HPE PROLIANT MICROSERVER GEN10 PLUS MICRO TOWER SERVER - USED picture

HPE PROLIANT MICROSERVER GEN10 PLUS MICRO TOWER SERVER - USED

$550.00



HP PROLIANT MICROSERVER MICRO SERVER HSTNS-5151 T4-C10 picture

HP PROLIANT MICROSERVER MICRO SERVER HSTNS-5151 T4-C10

$99.00



HP Microserver Gen10 8 AMD Opteron X3421 GB of RAM 128GB SSD picture

HP Microserver Gen10 8 AMD Opteron X3421 GB of RAM 128GB SSD

$325.00



HP ProLiant MicroServer Gen8 Server Xeon E3-1220L 8GB RAM No HDD's picture

HP ProLiant MicroServer Gen8 Server Xeon E3-1220L 8GB RAM No HDD's

$229.99



HP ProLiant MicroServer Gen8 Server Xeon E3-1220L 8GB RAM No HDD's picture

HP ProLiant MicroServer Gen8 Server Xeon E3-1220L 8GB RAM No HDD's

$229.99



HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon picture

HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon

$1018.73



DATTO-1000 Mini PC Micro Server 8GB RAM picture

DATTO-1000 Mini PC Micro Server 8GB RAM

$74.98



HP ProLiant Microserver Micro Server HSTNS-5151 untested picture

HP ProLiant Microserver Micro Server HSTNS-5151 untested

$75.00



HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server P54644001 picture

HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server P54644001

$849.99