-
Transfer of files
I have a new HD in my computer and the old unfunctioning one is set as slave. I boot to Knoppix and I can see both drives and the files I need to salvage from my old drive, but when I try to copy them to the new drive it says it cannot make the directory. It will not allow me to create a new folder either. Any ideas on what I need to do. Your help is greatly appreciated.
-
Senior Member
registered user
Re: Transfer of files
It's probably just permissions.
Could you post the output of a couple of commands to check on that. If your getting the message that you can't create a directory .... your probably trying to work from your user account on a mount point owned by root, and or, the executable permissions on your directory is restricted.
>>
I boot to Knoppix and I can see both drives and the files I need to salvage from my old drive.
>>
Have you got Knoppix installed to your new drive as a dedicated install ? ... sounds like it.
post the output of
]# mount
]# ls -al /mnt/[list=1]
or where ever the old drive is mounted.
You may just need to su to root.
]$ su
Password: <enter root pass_word>
]#
/etc/fstab would be worth looking at too, try adding "users" or "user" to the option list for the mount point. You may need to change the group association for your mount points too, jut to make them more flexible.
If you post the above, that shoild reveal what the state is at present.
Then ....
cd to wereever on your new drive and,
]# tar -C <path to old drive> -c <some file> | tar -C . -x
eg:
]# cd /dialups/logs/
]# tar -C /dialups/logs/2005 -c retrieved_urls | tar -C . -x
That will copy the "retrieved_urls" sub_directory of /dialups/logs/2005 and extract it to the current "/dialups/logs/" directory.
A bit of over kill for the above, but handy for across drives.
If you have a split_screen file manager, it would probably be better to just copy between the two file manager windows.
There is a program called "rsync" that would also be good, but i haven't used it to any degree to say much there.
>>
I have a new HD in my computer and the old unfunctioning one is set as slave.
>>
unfunctioning one !
jm
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~
Similar Threads
-
By DonS in forum MS Windows & New to Linux
Replies: 8
Last Post: 02-13-2008, 10:24 AM
-
By lilsirecho in forum Klik
Replies: 0
Last Post: 01-17-2005, 08:23 PM
-
By method in forum Networking
Replies: 3
Last Post: 10-18-2004, 05:32 PM
-
By furryfren in forum General Support
Replies: 3
Last Post: 07-23-2004, 12:22 PM
-
By perrond in forum General Support
Replies: 1
Last Post: 06-18-2004, 12:45 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Cisco SG110 24 Port Gigabit Ethernet Switch w/ 2 x SFP SG110-24
$117.00
1783-SFP1GTE AB 1G copper SFP #ZYPL
$879.87
Cisco SF350-08 8-Port Managed 10/100 Switch SF350-08-K9-NA
$164.00
Cisco 110 24 Port 10/100 Ethernet Switch with 2 x SFP SF112-24-NA
$90.00
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*
$18.00
Cisco SFP-10G-LR-S SFP+ 1310nm 10km DOM Transceiver Module 10-3107-01 - 1 Year
$41.59
Genuine Cisco SFP-10G-SR Transceiver Module (10-2415-03)
$5.65
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$89.00
Cisco Meraki MA-SFP-10GB-SR 10G SFP+ SR 850nm 300m LC MMF
$29.99