Sure it's not in /usr/lib?
A google for
libg2c.so.0 debian
throws up some items which suggest a symlink may be missing.
I am running knoppix 3.3 with no problem.
However, I have a small program compiled on another linux machine and the executable file, which runs fine on the machine it is compiled on, will not run on the Knoppix machine.
It complains that it can not find a shared library: "libg2c.so.0"
This is understandable since the library is for Fortran and not on the knoppix CD.
Question: Is there any way to add this library (libg2c.so.0) so that I can run the small program on the knoppix machine. ( I have plenty of space on my 512 MB usb drive.)
Of couse, if I could link the library into the execuatable in the first place on the compiling machine, then it should not need the additional library. However, I have not found a way to do that (I am compiling the small program using g77 compiler).
TIA, Bob
Sure it's not in /usr/lib?
A google for
libg2c.so.0 debian
throws up some items which suggest a symlink may be missing.
apt-get install libg2c0
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray
$179.00
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell Poweredge M620 Blade Server 2x E5-2680 v2 2.8ghz 20-Cores / 256gb / H710
$499.99
Dell PowerEdge VRTX Rack Chassis 25-Bay 14.4TB HDD 2x M640 Blade 512GB RAM 2-Bay
$2335.00
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
DELL POWEREDGE M620 Blade 2x Xeon E5-2680 2.7GHz 256GB RAM NO HDD
$84.00
HP ProLiant BL460c Server Blade (2 x CPU) 24GB RAM/No Drives
$45.60
Dell PowerEdge M620 Blade Server
$39.99
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99