Wow - you give us nothing to work with. Unfortunately my crystal ball runs on widoze and it keeps crashing so how about posting some error messages, system details, what have you tried etc.
Does anybody know how to get the above to work..? Puzzled
Wow - you give us nothing to work with. Unfortunately my crystal ball runs on widoze and it keeps crashing so how about posting some error messages, system details, what have you tried etc.
I would expect it to be much like an IDE zip, you need to have a disk in the drive when you boot, do that and see if it is recognized, in KDE I would expect a desktop icon, if that doesn't seem to work then from a terminal window or console look in dmesg for something about your LS drive using the following command:
dmesg | grep LS-120
if that does not give any info try:
dmesg | grep sd
also you could look at all connected scsi devices by using:
cat /proc/scsi/scsi
We need more info to help you any more than that.
rock
On my panasonic laptop my ls-120 drive was seen as sda and it was in the /mnt directory after install so you will have to mount sda. So my fix was as follows.
mount /dev/floppy /mnt/sda
here is the link to my entire post
http://www.knoppix.net/forum/viewtopic.php?t=1585
hope this helps
Nthline
Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig UPOE Network Switch, no module
$349.97
Cisco Nexus N9K-C92160YC-X 48P 25GbE SFP28 6P QSFP+/QSFP28 PE Switch
$475.00
Cisco Nexus 48-Port 10G SFP+ Switch N9K-93128TX w/ 9K-M12PQ 12-Port 40G QSFP
$112.49
CISCO DS-SFP-FC64G-SW Sealed Hologram New
$200.00
GENUINE Cisco SFP-10G-SR V03 SFP+ GBIC Transceiver Module 10-2415-03
$6.80
Cisco Nexus N3K-C3064PQ-10GX 48P 10GbE SFP+ 4P QSFP+ Switch (Fair)
$85.00
Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850
$30.99
C9300-NM-8X CISCO Catalyst 9300 8 x 10GE Network Module
$235.80
Cisco Nexus 9300 48-Port 25GbE SFP 6x100GbE QSFP Switch P/N: N9K-C93180YC-EX
$499.99
Cisco ASR 901 Aggregation Services Router A901-12C-FT-D
$59.99