Hi, apologies as I've just discovered Knoppix so bear with me if I ask silly questions
I'm currently running on a Linksys HPN200 HomePNA 2.0 network.
I have already downloaded Linksys beta linux drivers and compiled them successfully:
However when I try insmod -f il.oCode:make linuxver=2.4.26
I get
Lspci says it detected my card:Code:root@ttyp1[iL_hybrid]# insmod -f il.o Warning: loading il.o will taint the kernel: no license See http://www.tux.org/lkml/#export-tainted for information about tainted modules Warning: loading il.o will taint the kernel: forced load il.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output from dmes
Interestingly, it installs fine on my other computer.Code:0000:00:09.0 Ethernet controller: Broadcom Inc (nee Epigram) BCM4210 iLine10 HomePNA 2.0 (rev 01)
Can anyone shed light on this problem?
Do I have to rearrange or remove some of my PCI cards?
Thanks alot.
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$269.99
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$721.06
HP ProLiant DL360 G9 Server | 2 x E5-2660V3 2.6Ghz | 64GB | 2 x 900GB SAS HDD
$339.00
H261-Z61 2U 24SFF AMD Server 8x EPYC 7551 256-Cores 256GB RAM 8x25G NIC 2x2200W
$2612.18
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$274.00
HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD
$196.95
Dell Poweredge R730xd 2.5in 2x E5-2690 v3 2.6ghz 24-Cores 64gb H730 2x 750w
$189.99
HP ProLiant DL360 Gen9 Server 2x E5-2699v3 2.3GHz =36 Cores 32GB P440AR 4xRJ45
$309.00
Dell Poweredge R620 8-Bay 1U Server 2* Intel Xeon E5-2690 2.90GHz 256GB No HD
$149.99