Are You able to get into w$?
i installed knoppix to my seagate baracuda 160gb, on a 10gb partition, but it refused to boot. i could select windows or linux from LILO, but when i choose either, it just gave ma a blank screen.
So i formatted the disk again, but when i rebooted, it said the hdd was 0gb, and its name had changed from ST3160021A to ST>1<0<2!! or something similar... and now nothing can read the hdd. Any ideas? could it have been knoppix that did this? thanks either way
Are You able to get into w$?
w$?
Sorry... Windows.
no nothing can read/write the drive....
also, the only way i can boot knoppix is to disconnect the hdd, as knoppix crashes on startup when it tried to search the hdd for a home directory or sumething like that
iirc, some drives that are big have a parrtition which has something the disk needs to work properly, thats all i can say.
Does this mean that KNOPPIX delete that partition?
It sounds strange; usually linux is know to be very respecfull of data.
No but the problem is with the new 2.6 kernel. Your partition table is corrupted and can be repaired as adviced in SUSE's page http://portal.suse.com/sdb/en/2004/0...booting91.htmlOriginally Posted by georgewh
The problem is that the BIOS and Linux 'see' different disk geometries AND The Windows partition is > 8 GB. Activate LBA from BIOS and check that hard disk value IS NOT set to AUTO.
-tapsa-
i tried this, but when i add the 'driver update' for the suse installation, it sees the hdd as 160gb, and says that the partition table is 'OK', and doesnt change anything, however, it wont install, as it says its unable to create partition hda2.Originally Posted by tr
when i reboot, it detects the name correctly, but after i try to access the drive, it becomes unreadable again
also, the 'auto' setting in my bios has always worked correctly before, with LBA enabled. the only other setting i have in the bios is 'auto, disabled, cdrom', so i have no choice
but thanks for your help anyway!
[quote]: also, the 'auto' setting in my bios has always worked correctly before, with LBA enabled. the only other setting i have in the bios is 'auto, disabled, cdrom', so i have no choice.
Did You clik "ENTER" when You scroll between "AUTO CDROM DISABLE"? If not You have to do this after You see "AUTO".
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99
Dell PowerEdge M620 Blade Server
$39.99
HP ProLiant 460 Gen 6 Blade Server 2x 4C 2.0Ghz Xeon E5504, 48gb DDR3, 1x146gb
$99.99
HP Proliant BL460C Gen8 Blade Server 2x 8C E5-2690 192GB Ram
$58.69
DELL POWEREDGE M630 BLADE SERVER 2X E5-2560 V3 10C 256GB RAM No HDD IDRAC 8 H330
$379.00
CISCO UCSB-B200-M3 V06 BLADE SERVER 2*INTEL XEON E5-2640 V2 8C 2GHz 128GB RAM
$74.99
NEW Dell PowerEdge M820 Blade Server 2x Xeon E5-4603 @2GHz 32GB RAM 2x 10gb net
$599.00
Cisco UCS B200 M4 Blade Server 2X E5-2697A V4 18C 36T 2.60GHZ 512GB RAM No HDD
$809.10
HP ProLiant BL460c G8(Gen8) 2x 8 CORE E5-2670 2.6GHz 192GB RAM 2x 146GB SAS HDD
$59.00