Hi. I installed Knoppix 3.3 on HDD. When I boot off HDD, startx won't work but it works when I boot from CD.
Hardware is Dell Latitude CPi, NeoMagic. At first, it just tried the SVGA so I made a change so that it would use NeoMagic(/etc/sysconfig/xserver)...shouldn't it do that automatically like on the CD?
I get lots of no symbols found for libGLcore.a and libspeedo.a and font render already registered at priority 0. Is that normal? I dont think this is the problem though.
Here is what is different in the logs.
Good:
(II) PCI: stages = 0x03, oldVal1 = 0x8000183c, mode1Res1 = 0x80000000
(II) Bus 1: bridge is at(0:3:0),(0,1,4), BCTRL: 0x0500()VGA_EN is cleared
(II) Bus 5: bridge is at(0:3:0),(0,1,4), BCTRL: 0x05c0()VGA_EN is cleared
Bad:
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: 01:00:0 chip 1737,ab08 card 1737,ab08 rev 11 class 02,00,00 hdr 00
(II) Bus 1: bridge is at(0:3:0),(0,1,4), BCTRL: 0x05c0()VGA_EN is cleared
(II) Bus 5: bridge is at(0:3:0),(0,1,4), BCTRL: 0x05c0()VGA_EN is cleared
Seems like my startup is detecting different things. Any ideas?
Dell Precision 5810 Workstation Xeon E5-1650 6C 3.5GHz 16GB 500GB Win10 K2200
$115.94
E5-2699V4 Intel Xeon Processor 55M Cache, 2.20 GHz SR2JS CM8066002022506
$155.00
HP Z440 Workstation Xeon E5-1603 v4 QC 2.80GHz CPU 32GB RAM Quadro K2200
$79.99
Dell T7810 Workstation 1x E5-2603 v3 16GB RAM Nvidia QUADRO +cables
$120.00
SR1XP Intel Xeon E5-2680 v3 12 Core 30MB 2.5GHz LGA 2011-3 Grade A Processor
$3.38
Intel Xeon Gold 6148 SR3B6 2.40Ghz LGA 3647 20-Core Server CPU Processor.
$79.99
Intel Xeon E5-2640v4 2.4GHz 10-Core 25MB 90W SR2NZ
$5.45
Intel Xeon E5-2667 V2 LGA 2011 3.3GHz 8 Core 130W 25MB 8GT/s CPU Processor
$14.99
Matched pair Intel Xeon E5-2667v4 SR2P5 3.20GHz, 8 core, 25MB Processors LGA2011
$62.95
Intel Xeon E5-2667 V4 SR2P5 (3.2GHZ/8-CORE/25MB/135W) PROCESSOR CPU
$29.89