-
unable to view/access my win98se(fat32) partitions
hi,
i am a newbiee in the world of linux but like knoppix so much that i decided to install it on my hd. the problems rise from here only, i am having a 2.4 ghz prossesor with intel 845gvad2 motherboard and 256mb of DDR RAM with two harddisks(40 gb samsung &4gb seagate) so i installed knoppix on my smaller hd with a 256mb swap and the rest as ext2.
1. After many & i was able to install knoppix on it with lilo but after bios data check each time i got a message :-
you passed an undefined mode no press [return] to see available mode
press space to continue or wait 30 secs. i am using a samsung 17" syncmaster 753s.
2.further more my linux partitionn remains read-only even after mount command when i login as user and is read-write as root after using mount command(also with sudo when as user)
i have 5 partition of fat32
3. After login i was unable to found my fat32 partitions from my second drive.
when running fdisk-l i got
disk /dev/hdc:4327mb
Device Boot ID System
/dev/hdc1 * 83 linux
/dev/hdc2 82 linux swap
Partition table entries are not in disk order
disk /dev/hda:40.0gb
Device Boot ID System
/dev/hda1 * b w95fat32
/dev/hda2 f w95 ext'd(LBA)
/dev/hda5 b w95fat32
/dev/hda6 b w95fat32
/dev/hda7 b w95fat32
/dev/hda8 b w95fat32
any help is welcomed
Thanks in advance
-
Re: unable to view/access my win98se(fat32) partitions
Originally Posted by
a2ilindia
hi,
i am a newbiee in the world of linux but like knoppix so much that i decided to install it on my hd. the problems rise from here only, i am having a 2.4 ghz prossesor with intel 845gvad2 motherboard and 256mb of DDR RAM with two harddisks(40 gb samsung &4gb seagate) so i installed knoppix on my smaller hd with a 256mb swap and the rest as ext2.
1. After many
&
i was able to install knoppix on it with lilo but after bios data check each time i got a message :-
you passed an undefined mode no press [return] to see available mode
press space to continue or wait 30 secs. i am using a samsung 17" syncmaster 753s.
2.further more my linux partitionn remains read-only even after mount command when i login as user and is read-write as root after using mount command(also with sudo when as user)
I have a nvidia graphis card with tv-out. When the tv-out cable is plugged in i get the same message. If i unplug the tv-out cable the message disapers!
Perhaps this is the problem!
i have 5 partition of fat32
3. After login i was unable to found my fat32 partitions from my second drive.
when running fdisk-l i got
disk /dev/hdc:4327mb
Device Boot ID System
/dev/hdc1 * 83 linux
/dev/hdc2 82 linux swap
Partition table entries are not in disk order
disk /dev/hda:40.0gb
Device Boot ID System
/dev/hda1 * b w95fat32
/dev/hda2 f w95 ext'd(LBA)
/dev/hda5 b w95fat32
/dev/hda6 b w95fat32
/dev/hda7 b w95fat32
/dev/hda8 b w95fat32
any help is welcomed
Thanks in advance
I asume that the problem is that for some reason there's not created a proper /etc/fstab file.
(Perhaps hda was unpluged when you installed knoppix.)
For eatch partition you have to create a line in /etc/fstab witch looks like this:
Code:
#Partition #Mountpoint #Filesystem #Options
/dev/hda1 /mnt/hda1 vfat noauto,users,exec,umask=000 0 0
Exept for /devhda2 because it's the contanor for hda5 to hda8
So hda3 would look like this:
Code:
/dev/hda3 /mnt/hda3 vfat noauto,users,exec,umask=000 0 0
As you can see you only have to change the partition and the mount point.
The mount point is a dictory, and that must exist, else mounting fails!
-
help!!!!!!!!!!!!!!!!!!!!!!!
thank you Gozar for your reply
it is right that hda 1 was unpluged during the installation of knoppix(3.3) and thank u again for telling such an easy solution(yet to work on them) but i have two more problems
1. After many & i was able to install knoppix on it with lilo but after bios data check each time i got a message :-
you passed an undefined mode no press [return] to see available mode
press space to continue or wait 30 secs. i am using a samsung 17" syncmaster 753s.
2.further more my linux partitionn remains read-only even after mount command when i login as user and is read-write as root after using mount command(also with sudo when as user).
can you help in this or anyone else will help a newbie
-
Re: help!!!!!!!!!!!!!!!!!!!!!!!
Originally Posted by
a2ilindia
thank you Gozar for your reply
it is right that hda 1 was unpluged during the installation of knoppix(3.3) and thank u again for telling such an easy solution(yet to work on them) but i have two more problems
1. After many & i was able to install knoppix on it with lilo but after bios data check each time i got a message :-
you passed an undefined mode no press [return] to see available mode
press space to continue or wait 30 secs. i am using a samsung 17" syncmaster 753s.
What Graphis card do you have?
2.further more my linux partitionn remains read-only even after mount command when i login as user and is read-write as root after using mount command(also with sudo when as user).
can you help in this or anyone else will help a newbie
What are you trying to do exacley?
Normal users on a system usaely only have write access to there home directory. /home/username
This is to protect the system, so useres can't delete system files
You can change rightes to a file or dictory with the command chmod and change ownership with chown[/b]
-
hi gozar,
thank ones again for giving attention
I have an Intel D845GVAD2 motherboard with integrated graphics and no other graphic card but i do have an pinnacle tvtuner card but that is also not in use nowadays
I am not trying to do something indifferent but i do want read-write access on my linux partition as user knoppix,till now i am able to write on my hard disk only when i login as root and that to after using the remount command each time but i want to have read-write access on my hard disk so as i can normally work in knoppix as i do in windows(creating files,directories saving my work on it). i am able to read but am unable even to create a file on disk and want your help doing it.
-
About your graphis card i'm afraid i cant help you.
About your other problem. I can't help you if you are telling that you are douing sort of this, and sort of that! I need to know exactley what you are trying to do. I can't magciley read your mind ang guess hvad you are trying to do. So more information is needed.
Similar Threads
-
By Josh83 in forum Hdd Install / Debian / Apt
Replies: 3
Last Post: 04-03-2005, 05:50 AM
-
By John in Brisbane in forum General Support
Replies: 5
Last Post: 05-26-2004, 05:27 PM
-
By johnnylipps in forum Hdd Install / Debian / Apt
Replies: 7
Last Post: 10-15-2003, 03:18 AM
-
By Pex_boa in forum Hdd Install / Debian / Apt
Replies: 7
Last Post: 04-10-2003, 08:20 PM
-
By pc_dev in forum Hdd Install / Debian / Apt
Replies: 4
Last Post: 02-27-2003, 08:50 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Hynix Hma84gr7mfr4n-uh 32gb Ddr4-2400 ECC Reg DIMM Server Memory LOT OF 10
$340.00
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
Samsung 16GB 2Rx4 PC4-2133P DDR4-17000 1.2V RDIMM ECC Registered Server Memory
$15.49
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$12.90
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
A-Tech 16GB 2 x 8GB PC3-12800 Laptop SODIMM DDR3 1600 Memory RAM PC3L 16G DDR3L
$27.98
HyperX FURY RAM DDR4 16GB 8GB 32GB 4GB 3200 2666 2400 2133 Desktop Memory DIMM
$9.64
Crucial DDR3L 16GB 1600 2x 8GB PC3-12800 Laptop SODIMM Memory RAM PC3 16G DDR3
$21.50
A-Tech 256GB 4x 64GB 4Rx4 PC4-19200 ECC Load Reduced LRDIMM Server Memory RAM
$287.96
A-Tech 128GB 4x 32GB 2Rx4 PC4-19200R DDR4 2400 ECC REG RDIMM Server Memory RAM
$191.96