Results 1 to 6 of 6

Thread: unable to view/access my win98se(fat32) partitions

  1. #1
    Junior Member
    Join Date
    Jun 2004
    Posts
    3

    unable to view/access my win98se(fat32) partitions

    hi,
    i am a newbiee in the world of linux but like knoppix so much that i decided to install it on my hd. the problems rise from here only, i am having a 2.4 ghz prossesor with intel 845gvad2 motherboard and 256mb of DDR RAM with two harddisks(40 gb samsung &4gb seagate) so i installed knoppix on my smaller hd with a 256mb swap and the rest as ext2.
    1. After many & i was able to install knoppix on it with lilo but after bios data check each time i got a message :-
    you passed an undefined mode no press [return] to see available mode
    press space to continue or wait 30 secs. i am using a samsung 17" syncmaster 753s.
    2.further more my linux partitionn remains read-only even after mount command when i login as user and is read-write as root after using mount command(also with sudo when as user)

    i have 5 partition of fat32
    3. After login i was unable to found my fat32 partitions from my second drive.
    when running fdisk-l i got
    disk /dev/hdc:4327mb
    Device Boot ID System
    /dev/hdc1 * 83 linux
    /dev/hdc2 82 linux swap

    Partition table entries are not in disk order

    disk /dev/hda:40.0gb
    Device Boot ID System
    /dev/hda1 * b w95fat32
    /dev/hda2 f w95 ext'd(LBA)
    /dev/hda5 b w95fat32
    /dev/hda6 b w95fat32
    /dev/hda7 b w95fat32
    /dev/hda8 b w95fat32

    any help is welcomed
    Thanks in advance

  2. #2
    Member registered user
    Join Date
    Jan 2003
    Posts
    37

    Re: unable to view/access my win98se(fat32) partitions

    Quote Originally Posted by a2ilindia
    hi,
    i am a newbiee in the world of linux but like knoppix so much that i decided to install it on my hd. the problems rise from here only, i am having a 2.4 ghz prossesor with intel 845gvad2 motherboard and 256mb of DDR RAM with two harddisks(40 gb samsung &4gb seagate) so i installed knoppix on my smaller hd with a 256mb swap and the rest as ext2.
    1. After many & i was able to install knoppix on it with lilo but after bios data check each time i got a message :-
    you passed an undefined mode no press [return] to see available mode
    press space to continue or wait 30 secs. i am using a samsung 17" syncmaster 753s.
    2.further more my linux partitionn remains read-only even after mount command when i login as user and is read-write as root after using mount command(also with sudo when as user)
    I have a nvidia graphis card with tv-out. When the tv-out cable is plugged in i get the same message. If i unplug the tv-out cable the message disapers!
    Perhaps this is the problem!

    i have 5 partition of fat32
    3. After login i was unable to found my fat32 partitions from my second drive.
    when running fdisk-l i got
    disk /dev/hdc:4327mb
    Device Boot ID System
    /dev/hdc1 * 83 linux
    /dev/hdc2 82 linux swap

    Partition table entries are not in disk order

    disk /dev/hda:40.0gb
    Device Boot ID System
    /dev/hda1 * b w95fat32
    /dev/hda2 f w95 ext'd(LBA)
    /dev/hda5 b w95fat32
    /dev/hda6 b w95fat32
    /dev/hda7 b w95fat32
    /dev/hda8 b w95fat32

    any help is welcomed
    Thanks in advance
    I asume that the problem is that for some reason there's not created a proper /etc/fstab file.
    (Perhaps hda was unpluged when you installed knoppix.)

    For eatch partition you have to create a line in /etc/fstab witch looks like this:
    Code:
    #Partition		#Mountpoint	#Filesystem	#Options
    /dev/hda1		/mnt/hda1		vfat			noauto,users,exec,umask=000	0	0
    Exept for /devhda2 because it's the contanor for hda5 to hda8
    So hda3 would look like this:
    Code:
    /dev/hda3		/mnt/hda3		vfat			noauto,users,exec,umask=000	0	0
    As you can see you only have to change the partition and the mount point.
    The mount point is a dictory, and that must exist, else mounting fails!

  3. #3
    Junior Member
    Join Date
    Jun 2004
    Posts
    3

    help!!!!!!!!!!!!!!!!!!!!!!!

    thank you Gozar for your reply
    it is right that hda 1 was unpluged during the installation of knoppix(3.3) and thank u again for telling such an easy solution(yet to work on them) but i have two more problems
    1. After many & i was able to install knoppix on it with lilo but after bios data check each time i got a message :-
    you passed an undefined mode no press [return] to see available mode
    press space to continue or wait 30 secs. i am using a samsung 17" syncmaster 753s.
    2.further more my linux partitionn remains read-only even after mount command when i login as user and is read-write as root after using mount command(also with sudo when as user).

    can you help in this or anyone else will help a newbie

  4. #4
    Member registered user
    Join Date
    Jan 2003
    Posts
    37

    Re: help!!!!!!!!!!!!!!!!!!!!!!!

    Quote Originally Posted by a2ilindia
    thank you Gozar for your reply
    it is right that hda 1 was unpluged during the installation of knoppix(3.3) and thank u again for telling such an easy solution(yet to work on them) but i have two more problems
    1. After many & i was able to install knoppix on it with lilo but after bios data check each time i got a message :-
    you passed an undefined mode no press [return] to see available mode
    press space to continue or wait 30 secs. i am using a samsung 17" syncmaster 753s.
    What Graphis card do you have?
    2.further more my linux partitionn remains read-only even after mount command when i login as user and is read-write as root after using mount command(also with sudo when as user).

    can you help in this or anyone else will help a newbie
    What are you trying to do exacley?

    Normal users on a system usaely only have write access to there home directory. /home/username
    This is to protect the system, so useres can't delete system files
    You can change rightes to a file or dictory with the command chmod and change ownership with chown[/b]

  5. #5
    Junior Member
    Join Date
    Jun 2004
    Posts
    3
    hi gozar,
    thank ones again for giving attention
    I have an Intel D845GVAD2 motherboard with integrated graphics and no other graphic card but i do have an pinnacle tvtuner card but that is also not in use nowadays

    I am not trying to do something indifferent but i do want read-write access on my linux partition as user knoppix,till now i am able to write on my hard disk only when i login as root and that to after using the remount command each time but i want to have read-write access on my hard disk so as i can normally work in knoppix as i do in windows(creating files,directories saving my work on it). i am able to read but am unable even to create a file on disk and want your help doing it.

  6. #6
    Member registered user
    Join Date
    Jan 2003
    Posts
    37
    About your graphis card i'm afraid i cant help you.

    About your other problem. I can't help you if you are telling that you are douing sort of this, and sort of that! I need to know exactley what you are trying to do. I can't magciley read your mind ang guess hvad you are trying to do. So more information is needed.

Similar Threads

  1. should i use fat32 for win partitions instead of ntfs?
    By Josh83 in forum Hdd Install / Debian / Apt
    Replies: 3
    Last Post: 04-03-2005, 05:50 AM
  2. FAT32 Partitions with Knoppix
    By John in Brisbane in forum General Support
    Replies: 5
    Last Post: 05-26-2004, 05:27 PM
  3. after knoppix hdinstall fat32 partitions not available
    By johnnylipps in forum Hdd Install / Debian / Apt
    Replies: 7
    Last Post: 10-15-2003, 03:18 AM
  4. i cann't access my fat32 and ntfs partitions from knoppix
    By Pex_boa in forum Hdd Install / Debian / Apt
    Replies: 7
    Last Post: 04-10-2003, 08:20 PM
  5. Cannot see FAT32 nor NTFS partitions (WinXp related?)
    By pc_dev in forum Hdd Install / Debian / Apt
    Replies: 4
    Last Post: 02-27-2003, 08:50 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Cisco C3KX-NM-10G 4-Port SFP  10G Expansion Module 3750-X / 3560-X Switch picture

Cisco C3KX-NM-10G 4-Port SFP 10G Expansion Module 3750-X / 3560-X Switch

$50.00



FINISAR FTLX1471D3BTL TM SM 10KM SFP 1310NM CPRI 9.8G TRANSCEIVER picture

FINISAR FTLX1471D3BTL TM SM 10KM SFP 1310NM CPRI 9.8G TRANSCEIVER

$20.90



Cisco Nexus 48-Port 10G SFP+ Switch N9K-9396PX w/ 9K-M12PQ 12-Port 40G QSFP picture

Cisco Nexus 48-Port 10G SFP+ Switch N9K-9396PX w/ 9K-M12PQ 12-Port 40G QSFP

$419.99



Finisar FTLF8519P3BNL SFP-SX Gigabit 850nm LC SFP Transciever picture

Finisar FTLF8519P3BNL SFP-SX Gigabit 850nm LC SFP Transciever

$11.99



Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03  picture

Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03

$8.00



For Cisco SFP-10G-T, Ubiquiti UF-RJ45-10G Module 10G SFP+ to RJ45 10GBase-T picture

For Cisco SFP-10G-T, Ubiquiti UF-RJ45-10G Module 10G SFP+ to RJ45 10GBase-T

$48.59



NEW Sealed Cisco SFP-10G-SR-S 10G SR SFP+ Module 850nmMM *US Shipping* picture

NEW Sealed Cisco SFP-10G-SR-S 10G SR SFP+ Module 850nmMM *US Shipping*

$15.00



GENUINE Cisco SFP-GE-T EXT 30-1421-01 USA 1000BASE-T RJ45 SFP Transceiver picture

GENUINE Cisco SFP-GE-T EXT 30-1421-01 USA 1000BASE-T RJ45 SFP Transceiver

$9.99



10 PCS Cisco GLC-LH-SMD 10-2625-01 1310nm SFP Transceiver Module picture

10 PCS Cisco GLC-LH-SMD 10-2625-01 1310nm SFP Transceiver Module

$85.00



NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping* picture

NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*

$18.00