-
unable to view/access my win98se(fat32) partitions
hi,
i am a newbiee in the world of linux but like knoppix so much that i decided to install it on my hd. the problems rise from here only, i am having a 2.4 ghz prossesor with intel 845gvad2 motherboard and 256mb of DDR RAM with two harddisks(40 gb samsung &4gb seagate) so i installed knoppix on my smaller hd with a 256mb swap and the rest as ext2.
1. After many & i was able to install knoppix on it with lilo but after bios data check each time i got a message :-
you passed an undefined mode no press [return] to see available mode
press space to continue or wait 30 secs. i am using a samsung 17" syncmaster 753s.
2.further more my linux partitionn remains read-only even after mount command when i login as user and is read-write as root after using mount command(also with sudo when as user)
i have 5 partition of fat32
3. After login i was unable to found my fat32 partitions from my second drive.
when running fdisk-l i got
disk /dev/hdc:4327mb
Device Boot ID System
/dev/hdc1 * 83 linux
/dev/hdc2 82 linux swap
Partition table entries are not in disk order
disk /dev/hda:40.0gb
Device Boot ID System
/dev/hda1 * b w95fat32
/dev/hda2 f w95 ext'd(LBA)
/dev/hda5 b w95fat32
/dev/hda6 b w95fat32
/dev/hda7 b w95fat32
/dev/hda8 b w95fat32
any help is welcomed
Thanks in advance
-
Re: unable to view/access my win98se(fat32) partitions
Originally Posted by
a2ilindia
hi,
i am a newbiee in the world of linux but like knoppix so much that i decided to install it on my hd. the problems rise from here only, i am having a 2.4 ghz prossesor with intel 845gvad2 motherboard and 256mb of DDR RAM with two harddisks(40 gb samsung &4gb seagate) so i installed knoppix on my smaller hd with a 256mb swap and the rest as ext2.
1. After many
&
i was able to install knoppix on it with lilo but after bios data check each time i got a message :-
you passed an undefined mode no press [return] to see available mode
press space to continue or wait 30 secs. i am using a samsung 17" syncmaster 753s.
2.further more my linux partitionn remains read-only even after mount command when i login as user and is read-write as root after using mount command(also with sudo when as user)
I have a nvidia graphis card with tv-out. When the tv-out cable is plugged in i get the same message. If i unplug the tv-out cable the message disapers!
Perhaps this is the problem!
i have 5 partition of fat32
3. After login i was unable to found my fat32 partitions from my second drive.
when running fdisk-l i got
disk /dev/hdc:4327mb
Device Boot ID System
/dev/hdc1 * 83 linux
/dev/hdc2 82 linux swap
Partition table entries are not in disk order
disk /dev/hda:40.0gb
Device Boot ID System
/dev/hda1 * b w95fat32
/dev/hda2 f w95 ext'd(LBA)
/dev/hda5 b w95fat32
/dev/hda6 b w95fat32
/dev/hda7 b w95fat32
/dev/hda8 b w95fat32
any help is welcomed
Thanks in advance
I asume that the problem is that for some reason there's not created a proper /etc/fstab file.
(Perhaps hda was unpluged when you installed knoppix.)
For eatch partition you have to create a line in /etc/fstab witch looks like this:
Code:
#Partition #Mountpoint #Filesystem #Options
/dev/hda1 /mnt/hda1 vfat noauto,users,exec,umask=000 0 0
Exept for /devhda2 because it's the contanor for hda5 to hda8
So hda3 would look like this:
Code:
/dev/hda3 /mnt/hda3 vfat noauto,users,exec,umask=000 0 0
As you can see you only have to change the partition and the mount point.
The mount point is a dictory, and that must exist, else mounting fails!
-
help!!!!!!!!!!!!!!!!!!!!!!!
thank you Gozar for your reply
it is right that hda 1 was unpluged during the installation of knoppix(3.3) and thank u again for telling such an easy solution(yet to work on them) but i have two more problems
1. After many & i was able to install knoppix on it with lilo but after bios data check each time i got a message :-
you passed an undefined mode no press [return] to see available mode
press space to continue or wait 30 secs. i am using a samsung 17" syncmaster 753s.
2.further more my linux partitionn remains read-only even after mount command when i login as user and is read-write as root after using mount command(also with sudo when as user).
can you help in this or anyone else will help a newbie
-
Re: help!!!!!!!!!!!!!!!!!!!!!!!
Originally Posted by
a2ilindia
thank you Gozar for your reply
it is right that hda 1 was unpluged during the installation of knoppix(3.3) and thank u again for telling such an easy solution(yet to work on them) but i have two more problems
1. After many & i was able to install knoppix on it with lilo but after bios data check each time i got a message :-
you passed an undefined mode no press [return] to see available mode
press space to continue or wait 30 secs. i am using a samsung 17" syncmaster 753s.
What Graphis card do you have?
2.further more my linux partitionn remains read-only even after mount command when i login as user and is read-write as root after using mount command(also with sudo when as user).
can you help in this or anyone else will help a newbie
What are you trying to do exacley?
Normal users on a system usaely only have write access to there home directory. /home/username
This is to protect the system, so useres can't delete system files
You can change rightes to a file or dictory with the command chmod and change ownership with chown[/b]
-
hi gozar,
thank ones again for giving attention
I have an Intel D845GVAD2 motherboard with integrated graphics and no other graphic card but i do have an pinnacle tvtuner card but that is also not in use nowadays
I am not trying to do something indifferent but i do want read-write access on my linux partition as user knoppix,till now i am able to write on my hard disk only when i login as root and that to after using the remount command each time but i want to have read-write access on my hard disk so as i can normally work in knoppix as i do in windows(creating files,directories saving my work on it). i am able to read but am unable even to create a file on disk and want your help doing it.
-
About your graphis card i'm afraid i cant help you.
About your other problem. I can't help you if you are telling that you are douing sort of this, and sort of that! I need to know exactley what you are trying to do. I can't magciley read your mind ang guess hvad you are trying to do. So more information is needed.
Similar Threads
-
By Josh83 in forum Hdd Install / Debian / Apt
Replies: 3
Last Post: 04-03-2005, 05:50 AM
-
By John in Brisbane in forum General Support
Replies: 5
Last Post: 05-26-2004, 05:27 PM
-
By johnnylipps in forum Hdd Install / Debian / Apt
Replies: 7
Last Post: 10-15-2003, 03:18 AM
-
By Pex_boa in forum Hdd Install / Debian / Apt
Replies: 7
Last Post: 04-10-2003, 08:20 PM
-
By pc_dev in forum Hdd Install / Debian / Apt
Replies: 4
Last Post: 02-27-2003, 08:50 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Cisco 2901 Integrated Services Router
$50.99
Cisco Nexus 48-Port 10G SFP+ Switch N9K-9396PX w/ 9K-M12PQ 12-Port 40G QSFP
$419.99
GENUINE CISCO QSFP-40/100-SRBD 100G QSFP Transceiver
$129.99
Cisco WAP371 IEEE 802.11ac 1.27 Gbit/s Wireless Access Point
$80.00
Cisco WS-C3850-48P-L 48-Port Gigabit 3850 PoE Switch w/ 715W+ C3850-NM-4-1G Mod
$79.00
Cisco Nexus N3K-C3048TP-1GE 48 Port Switch w/ Dual Power - Same Day Shipping
$85.99
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
Cisco Catalyst 3850 Series 48-Port UPoE Gigabit Switch w/ C3850-NM-2-10G (BHN)
$98.96
Cisco C9300-48U-A 48-Port Gig UPoE Network Advantage Switch -Same Day Shipping
$859.95
Cisco Nexus N3K-C3172PQ-XL 48P 10GbE SFP+ 4P QSFP+ Switch N3K-C3172PQ-XL-F
$229.00