my guess is that it is possible, as long as the jas drive is above the hard drive in boot order. give it a shot.
Hi,
I am thinking to use a jaz drive to run knoppix which is supposed to be on a jaz disk. Do you think this is automaticly work or some configurations are needed or knoppix has to be run only from a CD. Has any one experienced this?
Best regards, Ramin
my guess is that it is possible, as long as the jas drive is above the hard drive in boot order. give it a shot.
If the JAZ is an IDE drive or picked up by bios, I would say yes. If it is 1 gb, you probably can put the iso on it and use knx-persistent home for part of it.
How to boot an iso?Originally Posted by zzyzx
Only way I found is to mount -o loop the iso and copy the iso-content
to hd. But it this is working, see:
http://www.knoppix.net/docs/index.php/FaqHdBased
Feedback, corrections and addings about this wiki-page are wellcome!
Greetings
rob
This is a 2GB scsi jas drive. I am thinking to have knoppix on one disk and carry it around when on trip and boot from it when i need Linux. installing knoppix like a linux distribution on a HD is clearly not a choice as different computers have different hardwares and configuration. This misses the whole point of knoppix. Then using the rest of the disk for storage (like /home)
if i need to save a file until i am back home.
Regards, Ramin
If possible you will need to partition the disk into 2 partitions and put the iso on the first partition, then you should be able to mount the second partition read/write and save to it. If you just try and use one partition knoppix assumes you are running from a read-only cd media and you will not be able to write to the rest of the disk.
rock
JUNIPER MPC5E-40G10G MPC5E CARD 6x40GE & 24x10GE, COUIBD1BAF
$3999.99
Juniper MX-MPC2-3D-A Router Card + MIC-3D-4XGE-XFP-A & MIC-3D-20GE-SFP
$799.99
Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch w/ Power Cord
$43.95
JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER
$210.00
Juniper EX3300-48P, 48 Port PoE+ Gigabit Network Switch w/ Power cord
$54.99
Juniper Networks EX3400-48P 48x Gigabit PoE+ RJ45 2x 40Gb/s QSFP+ Switch
$166.24
Juniper MX204 +JUNOS X2 AC Dual Power Supply JN204/MX204 4x40GbE Or 4x100GB
$6999.99
Juniper QFX5110-48S-AFO Switch, 48X 1/10GBE with 4X 40/100G QSFP+ *MINOR DAMAGE*
$1299.00
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$41.28
Juniper EX2300-48P PoE+ Switch 48x 1GbE & 4 SFP+/SFP 10G uplinks, Tested
$289.00