Have you tried this? Knoppix menu> Network/Internet> Network Card Configuration
Hi all;
Newby to Linux and Knoppix here - firstly, my apologies for lack of any Linux knowlwdge! (I do run a few ported Linux progs though, Lyx, Mozilla etc.)
Anyway - I've just found Knoppix on CD and have had a bit of a play. So far so good.....however;
1. I cannot connect to my LAN - DHCP does not pick up any IP addy. In Windoze i just select "obtain an IP address automatically" and it does.
2. I see that Lyx 1.3.4 is shipped with the Knoppix CD and would like to give it a go. Question is how does one "run" a program that does not appear(AFIK) on the start menu?
Have you tried this? Knoppix menu> Network/Internet> Network Card Configuration
Yep; I tried to manually configure with known IP, Gateway etc but still no joy
I've sorted it - of sorts
I have an on board LAN card that I use for a interanl home network and a PCI Netgear FA311 card which I use for external network connection
Knoppix + FA311 = No connection
Knoppix + onboard = All works fine
No idea why but I'm happy![]()
Dell PowerEdge R730 2x E5-2699V3 2.3Ghz 36 Core 128GB RAM H730 X520-I350 2x750W
$329.99
Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config
$509.99
Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays
$159.99
DELL PowerEdge R730XD Server 2x E5-2680v3 2.5GHz =24 Cores 32GB H730 4xRJ45
$271.00
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD
$197.99
DELL R630 SERVER 8 x 2.5'' 2X E5-2680V4 32GB RAM IDRAC ENT & NDC 2X 495W PSU
$174.95
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 240GB SSD 2x 10GBE
$259.00
DELL PowerEdge R630 8SFF Server 2x E5-2690v4 2.6GHz =28 Cores 256GB H730 4xRJ45
$562.00