I mean, I remastered KNOPPIX 3.4 by doing apt-get -t unstable upgrade and dist-upgrade to the KNOPPIX 3.4 source directory. I wanted to get the newest stuff.Originally Posted by RemasteringNoob
I've just remastered a KNOPPIX 3.4 CD that I had upgraded to the latest unstable packages. When I try to boot from the CD, the X server starts up and I can see the KNOPPIX background but it instantly exits and returns to the shell prompt. When I run startx, the result is the same. The shell prompt shows the error message: "X-Window session terminated with errors. Please check and retry /etc/init.d/xsession start."
I mean, I remastered KNOPPIX 3.4 by doing apt-get -t unstable upgrade and dist-upgrade to the KNOPPIX 3.4 source directory. I wanted to get the newest stuff.Originally Posted by RemasteringNoob
Sounds like you installed new versions of very important configuration scripts when you did your upgrade ...
kelmo is probably right, you have probably upgraded Knoppix configuration scripts out of existance. Now, what to do about it?Originally Posted by RemasteringNoob
1) Re-install & upgrade more conservatively?
2) Try to figure out which config scripts are causing problems & renew them from the original CD?
Can you boot your remaster while still installed on the CD? ie is it a true HD install? or just a copy to chroot into? If you can boot into it, does it run OK? Maybe you can track down the problem script this way.
I realize this is not much help. Sorry. I've burned myself a couple of times with 'apt-get upgrade' & 'dist-upgrade', now I only upgrade bits & pieces as need arises.
My remaster ISO sits in /dev/hda1/knoppix.iso and I boot knoppix from the CD using: knoppix bootfrom=/dev/hda1/knoppix.iso. I guess I'll have to do #2 above. Some script that startx or xinit calls is causing the X server to go away quickly. When I run the X server by itself (type X :0), it runs and it stays running.
hi,
do you mean :
"knoppix bootfrom=/dev/hda1/knoppix.iso "
that you can boot as if you had a virtual_cd_reader ?
That sounds interesting ,since I looked around for booting off
a "loopback_file" and never got answer.
Where do you find that ?
Maybe ~/.xsession-errors will tell you something but ATM I'm not even sure if that file is there or not.Originally Posted by RemasteringNoob
hi RemasterinNoob,Originally Posted by RemasteringNoob
I misundertood you (reason : the extension iso ).In fact ,your
"bootfrom=/dev/hda1/knoppix.iso" means your intention is to tell the booting process that your KNOPPIX_image is lying on hdd_hda1.If you read linuxrc (inside miniroot.gz or similar ramdisk_stuff)there is one line
case "$CMDLINE" in *fromhd=/dev/*) DEVICES="$fromhd" ; ;; esac
this means,if your original intention was as stated,you have to put instead-on cmdline
fromhd=/dev/hda1 only to say your image is sitting on hda1
and of course you need to have a directory named KNOPPIX,and containg a big file KNOPPIX
Yes, I got it from the Cheat Sheet .Originally Posted by wangji
oh,you just miss me,look at my post jul 22 just before yours !Originally Posted by RemasteringNoob
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM
$1419.00
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray
$179.00
HPE BL460c G10 ProLiant Blade | 2x Silver 4114 | 128GB | P204I | 2x1.2TB 10KRPM
$1869.00
Dell Poweredge M620 Blade Server 2x E5-2680 v2 2.8ghz 20-Cores / 256gb / H710
$499.99
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell PowerEdge M640 Blade Server 2x Xeon Gold 5122 3.6GHz, No RAM, READ _
$402.38
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG
$69.99
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99