-
I cannot boot KNOPPIX on HD!
I just followed "http://www.knoppix.net/docs/index.php/FaqHdBased
section 1.2"
After I used the command "lilo -C /mnt/hda3/boot/lilo.conf",
Knoppix responded me "Can't open /mnt/hda ....".
I wonder what the problem is.
I already checked "lilo.conf", but I couldn't find anything wrong.
Thus I can't reboot without CD-ROM or Floppy.
Please give me some advice.
Thanks.
My laptop is IBM X22.
I have only one hard disk.
Partitions are as follows:
hda1: FAT 32
hda2: linux swap
hda3: linux ext3
hda5(logical): FAT 32
TYRO cgu214
-
Re: I cannot boot KNOPPIX on HD!
Salve TYRO,
I wrote this text, because it worked on my Laptop.
>I just followed "http://www.knoppix.net/docs/index.php/FaqHdBased
>section 1.2"
>After I used the command "lilo -C /mnt/hda3/boot/lilo.conf",
>Knoppix responded me "Can't open /mnt/hda ....".
I found a small mistake, I wrote to link /mnt/hda3/boot to /
>>- ln -sf /mnt/ha3/boot/ /
>>
>>Lilo has to write to /boot/map. Because the CD-ROM is read only this
>>faild. So link the new /mnt/ha3/boot/ directory over /boot. But
>>aware to use full pathnames and use only "/" as linkname.
instead of ha3 it must be hda3. Sorry, I have corret the wiki now.
>I wonder what the problem is.
When this was not the reson for you problem I have another idea,
after linking /mnt/hda3/boot to / you could try to use
- ln -sf /mnt/hda3/boot/ /
lilo -C /boot/lilo.conf
>My laptop is IBM X22.
>I have only one hard disk.
>Partitions are as follows:
>hda1: FAT 32
>hda2: linux swap
>hda3: linux ext3
>hda5(logical): FAT 32
This seams that you use your laptop together with Windows.
I don't know if this make trouble for/with lilo. (I'm not
experianced with using lilo and Windows)
So I the idea with "lilo -C /boot/lilo.conf" helps.
Greeting
rob
Similar Threads
-
By helios17 in forum General Support
Replies: 7
Last Post: 11-27-2004, 06:27 AM
-
By proto in forum General Support
Replies: 3
Last Post: 03-17-2004, 11:29 PM
-
By ebone in forum Customising & Remastering
Replies: 4
Last Post: 05-16-2003, 02:26 AM
-
By mswarbrick in forum Customising & Remastering
Replies: 6
Last Post: 04-18-2003, 12:30 AM
-
By Dan_Netwalker in forum Hdd Install / Debian / Apt
Replies: 7
Last Post: 02-23-2003, 01:40 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray
$179.00
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Cisco UCS B200 M4 Blade Server, 2x2660 V3, 40GbE, No Ram No HDD
$35.95
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell PowerEdge VRTX Rack Chassis 25-Bay 14.4TB HDD 2x M640 Blade 512GB RAM 2-Bay
$1979.99
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge M640 Blade Server
$539.95
DELL PowerEdge M630 Blade 2x E5-2680v4 2.4GHz =28 Cores 128GB H330 2x10Gb X520
$294.00
Dell PowerEdge M620 Blade Server
$39.99