Have you tried this:
modprobe ohci1394
Let us know how it goes eh?
Hi,
I have a Sony Vaio GRX600. I have attached to it via the iLink (1394)port a hard drive inside a drive enclosure. Knoppix recognizes the 4 internal NTFS partitions on the Sony, but does not seem to recognize the external drive which is FAT32.
What can I do to help Knoppix recognize the external drive?
Thx,
tomber
************************
LCPI.txt
\@ \@compatible controller: ATI Technologies Inc Radeon Mobility M7 LW
(prog-if 00 [VGA])
Subsystem: Sony Corporation: Unknown device 80fa
Flags: bus master, stepping, fast Back2Back, 66Mhz, medium devsel, latency
66, IRQ 9
Memory at f0000000 (32-bit, prefetchable) [size=128M]
I/O ports at 3000 [size=256]
Memory at e8100000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: <available only to root>
02:05.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a
Subsystem: Sony Corporation: Unknown device 80fa
Flags: bus master, medium devsel, latency 168, IRQ 3
Memory at e8202000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
I/O window 0: 00004400-000044ff
I/O window 1: 00004800-000048ff
16-bit legacy interface ports at 0001
02:05.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a
Subsystem: Sony Corporation: Unknown device 80fa
Flags: bus master, medium devsel, latency 168
Memory at e8203000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176
I/O window 0: 00004c00-00004cff
I/O window 1: 00000000-00000003
16-bit legacy interface ports at 0001
02:05.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller
(prog-if 10 [OHCI])
Subsystem: Sony Corporation: Unknown device 80fa
Flags: bus master, medium devsel, latency 64
Memory at e8201000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <available only to root>
02:08.0 Ethernet controller: Intel Corp. 82801CAM (ICH3) Chipset Ethernet
Controller (rev 42)
Subsystem: Sony Corporation: Unknown device 80fa
Flags: bus master, medium devsel, latency 66, IRQ 9
Memory at e8200000 (32-bit, non-prefetchable) [size=4K]
I/O ports at 4000 [size=64]
Capabilities: <available only to root>
Have you tried this:
modprobe ohci1394
Let us know how it goes eh?
It's not working so I am going to get a new copy of Knoppix--one without the cloop errors. I bought this thing of ebay because the isos I download never match in md5 and won't boot. I am going to start over and repost later. Thx.
IBM 8203 E4A p520 Server 8203-E4A 4.2GHz 2-Core POWER6 32GB RAM / NO HDD USED
$99.99
IBM Power S822 12-Bay Server System Power8 Core 3.42Ghz DVD-Rom Drive 64GB No HD
$399.99
$16000.00
IBM System x3250 M4 Server Intel Xeon E3-1220 3.10GHz 8GB RAM No HDDs
$49.74
IBM Power 720 POWER7 00E6516 3.6GHz CPU 64GB RAM Server
$209.98
IBM Power 740 8205-E6C Express 8-SFF Power7 3.55GHz CPU 64GB RAM *No HDD* Server
$191.99
IBM 7944AC1 System x3550 M3 Server 1*Intel Xeon X5650 2.67GHz 4GB SEE NOTES
$26.97
IBM System x3550 M4 Server 2 x Intel Xeon E5-2609 36GB RAM No HDDs
$68.84
IBM Power S822 8284-22A 2.5" 12-Bay 64GB 2X 00ND478 2X 00E2865 *READ*
$599.99
IBM Lenovo X3650 M5 2U 8x 2.5” CTO Rack Server – 2x HS, 2x 750W
$199.00