-
Knoppix Networked Computer issues.
Hey, 1st of all...
I have not used the EN version of knoppix yet, its downloading now, because i downloaded the german version by accident
So i need to redownload... but while i was in the german version i noticed that the internet didnt work...
Ive got networked computers.. and i use the receiving computer..
So not the computer that has the internet, but the computer that recieves it..
Im using Windows XP, and it works fine with that, but in knoppix it didnt.
-
Senior Member
registered user
network config
Hi TechniK....If I am understanding you right, you say that your computer will not connect to internet while using the German version of KNOPPIX? Did you try to manually configure the network card? go to the Menu>Knoppix> and in there is an option to configure network card....computer is connected to a router and cable modem. When i log on to Knoppix, the network is auto detecetd....but if i have cable out of computer and plug it in after boot up, i will have to do a manual config. very easy...bob58
-
Senior Member
registered user
You need to run netcardconfig from a root shell. I usually choose the DHCP option and all is configured automagically!
Good Luck!
HTH,
AJG
-
hmm okay, ill try, im just burning the cd now.. ill tell you how it goes
Thanks, for the help.
-
Hmm... well at least this time it was the English version =)
I went to the configure network card thing.. and it said "No supported Network Card Found"
-
Senior Member
registered user
what network card is it ??
I have an unsupported one at work (broadcom gigabit) and I just keep the module on a USB key and load it when I use the work one then run netcardconfig...
-
How do i find out, ill check up on this again tommorow, i gotta go to bed now ( im 14 and its 11:00 PM )
So yeah, cya..
-
Junior Member
registered user
Hi, sorry to hijack your thread but then I have a problem which is similar to yours.
I just installed knoppix into my hdd yesterday(the first linux for me), but now everytime when I boot into the it, I'll need to configure the network card again before I can go online.
Is there a way to let knoppix remember the configuration so that I won't have to manually configure it everytime I start up?
PS: My network card is nforece2 onboard chip.
-
Hey Yanlong
What method did you use to install it?
It seems that some people (myself included) are having problems like this with HD installed Knoppix. I think it has something to do with the way the various installation methods operate.
-
Junior Member
registered user
Did you mean how do I install knoppix?
If so I install it using the command #sudo knoppix-installer
then I choose the beginner mode and follow step by step.
If you mean the network card,
I use network card configuration found in knoppix/network/internet
Similar Threads
-
By Synthpopalooza in forum Networking
Replies: 2
Last Post: 09-22-2005, 01:10 PM
-
By adamherb in forum Hdd Install / Debian / Apt
Replies: 0
Last Post: 01-10-2005, 11:05 PM
-
By MethodMan in forum Hdd Install / Debian / Apt
Replies: 0
Last Post: 08-30-2004, 09:25 PM
-
By JNeuhoff in forum Networking
Replies: 6
Last Post: 03-23-2004, 03:32 PM
-
By hernan in forum Networking
Replies: 0
Last Post: 09-15-2003, 02:30 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x600Gb SAS, Proxmox
$340.00
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$721.06
HP ProLiant DL360 G9 Server | 2 x E5-2660V3 2.6Ghz | 64GB | 2 x 900GB SAS HDD
$339.00
H261-Z61 2U 24SFF AMD Server 8x EPYC 7551 256-Cores 256GB RAM 8x25G NIC 2x2200W
$2612.18
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$274.00
HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD
$196.95
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
HP ProLiant DL360 Gen9 Server 2x E5-2699v3 2.3GHz =36 Cores 32GB P440AR 4xRJ45
$309.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00