Type knoppix testcd at startup, Its probably a bad burn.
My new Knoppix CD ver 3.4 boots and starts doing its configuration processes, then stalls in the lollowing step with the message:
"Scanning for harddisk partitions and creating /etc/stab ... insmod: insmod: a module named input already exists .... insmod: insmod: insmod hid failed"
Help is sorely needed. Thanks
WFM
Type knoppix testcd at startup, Its probably a bad burn.
Coud you expand on that explanation? This is a CD from Linus Central.Originally Posted by firebyrd10
Thanks.
When you first boot, type knoppix testcd at the prompt.
Problem resolved. I was simply not waiting long enough for the boot process to complete - it looked completely inactive, but wasn't.
Thanks anyhow.
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
Samsung 16GB 2Rx4 PC4-2133P DDR4-17000 1.2V RDIMM ECC Registered Server Memory
$16.29
Samsung 16GB (2x8GB) DDR4 2400MHz PC4-19200 Desktop RAM Memory M378A1K43CB2-CRC
$19.95
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$12.90
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
Corsair Vengeance LPX 32GB PC4-25600 (DDR4-3200) Memory NEVER USED LOOSE STICKS
$40.00
Kingston HyperX FURY DDR3 8GB 16GB 32G 1600 1866 1333 Desktop Memory RAM DIMM
$13.25
TeamGroup 16GB PC4 2666 PC4 21300 DDR4 2666MHz 1.2V CL19 Desktop RAM Memory
$27.95
A-Tech 256GB 4x 64GB 4Rx4 PC4-19200 ECC Load Reduced LRDIMM Server Memory RAM
$287.96
A-Tech 64GB 4x 16GB 2Rx4 PC4-17000R DDR4 2133MHz ECC REG RDIMM Server Memory RAM
$87.96