Type knoppix testcd at startup, Its probably a bad burn.
My new Knoppix CD ver 3.4 boots and starts doing its configuration processes, then stalls in the lollowing step with the message:
"Scanning for harddisk partitions and creating /etc/stab ... insmod: insmod: a module named input already exists .... insmod: insmod: insmod hid failed"
Help is sorely needed. Thanks
WFM
Type knoppix testcd at startup, Its probably a bad burn.
Coud you expand on that explanation? This is a CD from Linus Central.Originally Posted by firebyrd10
Thanks.
When you first boot, type knoppix testcd at the prompt.
Problem resolved. I was simply not waiting long enough for the boot process to complete - it looked completely inactive, but wasn't.
Thanks anyhow.
Seagate Exos X16 ST14000NM001G 14TB 512E SATA 6Gb/s 3.5" Enterprise Hard Drive
$157.99
WD 16TB Elements Desktop, Certified Refurbished Hard Drive - RWDBWLG0160HBK-NESN
$174.99
Seagate Exos X22 ST20000NM004E 20TB 512E SATA 6Gb/s 3.5" Enterprise Hard Drive
$268.99
WD 2TB Certified Refurbished Elements, External Hard Drive - RWDBU6Y0020BBK-WESN
$49.99
Seagate Exos 7E10 ST2000NM000B 2TB 7200RPM SATA 6.0Gb/s 3.5" Internal Hard Drive
$29.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$82.99
HGST Ultrastar HE10 HUH721010ALE600 10TB SATA 6Gb/s 7200RPM 3.5" Enterprise HDD
$74.99
2 PACK Seagate ST1000LM035 Mobile HDD 1TB 2.5" SATA III Laptop Hard Drive
$27.25
Seagate ST12000NM0538 Exos X14 12TB 3.5" SATA 6Gbps 3.5" Enterprise Hard Drive
$45.93
CISCO UCS-HD10T7KL4KN 10TB 7.2K 256MB 12GB SAS-3 3.5'' HUH721010AL4200 DRIVE
$249.97