Results 1 to 5 of 5

Thread: NETODRAGON success!!!!

  1. #1
    Junior Member
    Join Date
    Jul 2004
    Location
    Argentina
    Posts
    8

    NETODRAGON success!!!!

    Hi, here's the situation: I did get my ALI 5459 SmartLink PCI561 (a.k.a. Netodragon) to work in my knx-hdinstall'd (v3.2) after compiling the modules (v2.7.10) and modprob'd them but when I load ALSA sound drivers & make KPPP to dial to my ISP, the system hangs up to the point of no response at all.
    Is there an issue with winmodems and ALSA? Because modem seems to work fine without ALSA loaded.

  2. #2
    Senior Member
    Join Date
    Nov 2003
    Posts
    171
    Use a later version of the driver. 2.9+

  3. #3
    Junior Member
    Join Date
    Jul 2004
    Location
    Argentina
    Posts
    8
    I've tried that already with the same results. The problem seems to appear no matter the alsa modules are loaded or not. Compilation goes ok, insmod too, then I start kppp and dial my ISP's number, and then while dialing the system freezes absolutely.
    A possible solution might be trying with the 2.6 kernel wich includes support for this modem;
    I'm following the instructions from http://www.desktop-linux.net/debkernel.htm
    I'm doing it right now, but I'm stuck with the command make xconfig so I'm in need of help (here's the output of 'make xconfig'):

    Code:
    root@jetway-via:/usr/src/linux# make xconfig
      HOSTCC  scripts/basic/fixdep
    En el fichero inclu?do de /usr/include/sys/socket.h:35,
                     de /usr/include/netinet/in.h:24,
                     de scripts/basic/fixdep.c:107:
    /usr/include/bits/socket.h:305:24: asm/socket.h: No existe el fichero o el directorio
    make[1]: *** [scripts/basic/fixdep] Error 1
    make: *** [scripts_basic] Error 2
    root@jetway-via:/usr/src/linux# make gconfig
      HOSTCC  scripts/basic/fixdep
    En el fichero inclu?do de /usr/include/sys/socket.h:35,
                     de /usr/include/netinet/in.h:24,
                     de scripts/basic/fixdep.c:107:
    /usr/include/bits/socket.h:305:24: asm/socket.h: No existe el fichero o el directorio
    make[1]: *** [scripts/basic/fixdep] Error 1
    make: *** [scripts_basic] Error 2
    Could anyone tell me what am I doing wrong here?
    Thanks for the replies!

  4. #4
    Junior Member
    Join Date
    Jul 2004
    Location
    Argentina
    Posts
    8
    i've solved the last one: bad symlink in /usr/include/asm . Now it points to
    /usr/include/asm ------- /usr/src/linux/include/asm-i386 hehehe, my bad!

  5. #5
    Junior Member
    Join Date
    Jul 2004
    Location
    Argentina
    Posts
    8

    Success!!!

    Nevermind what i've said above, the problem was the motherboard PCI timing setings...solved changing "PCI Delay transaction" to "enabled" in CMOS setup utility.
    By the way i have got the -= OFICIAL NETODRAGON =- driver (based on SmartLink but version 2.9.10) directly from the manufacturer of my motherboard so thanks Jetway!!
    As far as I know, it is not in the web yet so I would like to share it, but I don't have any web or FTP space to upload it. Any suggestions are welcome...
    Here is the output of the ATI commands:

    ATI: NetoDragon Soft Modem
    ATI1: NetoDragon Soft Modem, 2.9.10 NetoDragon
    ATI2: NetoDragon Soft Modem, 2.9.10 NetoDragon
    ATI3: /dev/slamr0 modemap driver
    ATI4: s00=000 s01=000 s02=043 s03=013 s04=010 s05=008 s06=002 s07=060 s08=002 s09=006 s10=007 s11=100 s12=050 s13=000 s14=001 s15=001 s16=001 s17=000 s18=000 s19=000 s20=000 s21=000 s22=000 s23=000
    ATI5: Stored Profile 0:
    ATI6: Stored Profile 1:
    ATI7: Country: ARGENTINA

    And this is the motherboard model:
    625EMPxxx/625EMWxxx
    (serial motherboard)
    with embedded EBGA VIA C3 processor

Similar Threads

  1. AOL & Knoppix == success!!!
    By mabhatter in forum Networking
    Replies: 1
    Last Post: 12-08-2005, 10:38 PM
  2. Any success installing DVD to HD?
    By whitehat in forum Knoppix DVD
    Replies: 13
    Last Post: 10-18-2005, 06:24 PM
  3. Success Story
    By jimbo62 in forum Hdd Install / Debian / Apt
    Replies: 5
    Last Post: 05-16-2005, 02:29 AM
  4. DVD....TORAM...(Success!)
    By lilsirecho in forum Knoppix DVD
    Replies: 0
    Last Post: 10-03-2004, 01:45 AM
  5. My first remaster success
    By Tigren in forum Customising & Remastering
    Replies: 0
    Last Post: 01-02-2003, 08:04 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module picture

SFP-10G-SR V03 Original CISCO 10-2415-03 850nm 10GBASE-SR SFP+ Multi mode Module

$8.90



Cisco 1.25Gb 500m 850nm 1000Base-SX SFP Transceiver GLC-SX-MM picture

Cisco 1.25Gb 500m 850nm 1000Base-SX SFP Transceiver GLC-SX-MM

$2.94



For Cisco SFP-10G-SR 10GBase-SR 10G SFP+ Transceiver multimode SFP 850nm 300 M picture

For Cisco SFP-10G-SR 10GBase-SR 10G SFP+ Transceiver multimode SFP 850nm 300 M

$25.99



GENUINE Cisco SFP-10G-SR V03 10-2415-03 Transceiver Module  picture

GENUINE Cisco SFP-10G-SR V03 10-2415-03 Transceiver Module

$8.90



HP 1Gb SFP RJ-45 Module 453156-001 picture

HP 1Gb SFP RJ-45 Module 453156-001

$3.00



Cisco SFP-10G-SR 10-2415-03 SFP Transceiver picture

Cisco SFP-10G-SR 10-2415-03 SFP Transceiver

$7.98



Finisar FTLX8571D3BCL SFP+SR/SW 10Gb/s 850nm Multimode SFP+ Transceiver picture

Finisar FTLX8571D3BCL SFP+SR/SW 10Gb/s 850nm Multimode SFP+ Transceiver

$7.70



Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03  picture

Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03

$8.90



Genuine Cisco GLC-SX-MMD 1000Base-SX SFP Transceiver Module picture

Genuine Cisco GLC-SX-MMD 1000Base-SX SFP Transceiver Module

$7.90



Finisar FTLX8574D3BCL 10Gb/s 850nm Multimode Datacom SFP+ Transceiver picture

Finisar FTLX8574D3BCL 10Gb/s 850nm Multimode Datacom SFP+ Transceiver

$14.97