sorry i've made a mistake /dev/hda1 is win98(system)
and /dev/hda2 is linux ...sorry
Welcome everyone
I have a quite difficult problem. i have 2 operating systems on the same disk
knoppix and win98. And it is partitioned like this:
/dev/hda1 - ext3 knoppix
/dev/hda2 - fat32 win98 (system)
/dev/hda3 - linux swap
/dev/hda4 - fat32 win98 (storage)
for a long time both linux and win were recognising partitons /dev/hda2 and
/dev/hda4 as unhidden. However some time ago a had to install lilo through "liloconfig"
from that time partition /dev/hda4 is hidden and win 98 don't see it. Do You
have any suggestions to options in lilo.conf to make lilo unhide this partition I've tried something like this:
it didn't work. however i'm not sure in line set= the fstype for fat32Code:other=/dev/hda1 label=Win98 table=/dev/hda change automatic partition=/dev/hda1 set=dos16_big_normal activate partition=/dev/hda4 set=dos16_big_normal activate
another thing is that my disk is 40GB but my motherboard supports disks only to 32 GB and nothing after this limit can be used. however this partitions doesn't cross this limit
sorry i've made a mistake /dev/hda1 is win98(system)
and /dev/hda2 is linux ...sorry
I don't quite understand what you've done there. Lilo only needs info on partititions you want to boot from. So I only have this in /etc/lilo.conf to boot win2k:
other=/dev/hda1
label="Windows2K(hda1)"
As for the 32GB limit, do you have an Award bios or Matrox hd?
Have a look at: http://www.dewassoc.com/kbase/hard_d...e_barriers.htm
HP PROLIANT MICROSERVER MICRO SERVER HSTNS-5151 T4 Used.
$45.00
HP ProLiant Xeon E3-1220L V2 16 GB RAM 2.30 GHz MicroServer Gen8 NO DRIVES
$174.99
HPE Proliant Microserver Gen10 X3421 Perf AMS, P03698-S01, 16GB Ram
$299.00
HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ*
$94.99
Supermicro Server Tower Xeon BOOTS E5-2620 v4 2.10GHz 64GB RAM NO HDD NO OS
$199.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$846.19
SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD
$90.00
2U 12 Bay SAS3 SuperMicro Server 6028U-TR4T+ W/ X10DRU-i+ Barebone 12 Caddy RAIL
$299.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00