Sounds like you need to use a cheat code to pass the proper parameters to your hardware. Tell us about your video card and monitor. You can find the cheat codes in the Docs.
For some reason, when I boot up knoppix, It does all of the stuff it needs to do, but it doesnt take me to the desktop..Just a full screen terminal..
Can anyone help?
Sounds like you need to use a cheat code to pass the proper parameters to your hardware. Tell us about your video card and monitor. You can find the cheat codes in the Docs.
Well, I have a laptop with a 15.4 inch screen.
The video card...
A radeon IGP 354M w/64 mb of memory
Also..If it helps, I was going over to my mom's (different IP or something?(my parents are divorced)), and I was in the terminal, and typed "shutdown now"..it said "sending all proceses the TERM signal", then froze up, so I had to use a hard shutdown...If that makes a difference..It was working before when I was @ my dad's..
Can anyone help?
I presumed you were running the live cd. If so it shouldn't make any difference how it shut down. If running from hdd install then it *may* matter.
When you boot the disc on subsequent attempts are you using any cheat codes? Perhaps try:
knoppix xmodule=radeon
Or perhaps another cheat code or combination of codes. They can be found here: http://www.knoppix.net/docs/index.php/CheatCodes
Usually it should provide an error message when it fails to start X (x-windows). Post the error please.
I'm not running from the CD. I'm running from the HD. It has all the hardware info saved on it. So, I'm not sure why it wouldnt work, because It was working, like, ten minutes before..
I also have no clie how to enter the cheat codes..=/
Tell me, do you have a user login at the full screen terminal you get after booting?
If you do, you can login, and type the command:
or even:Code:startx
Then, you should have a desktop, unless something has gone terribly wrong with your installation.Code:X :0.0 | xterm -display :0.0 -e startkde
Also, you may wan't to post any errors you get at bootime (if any), and, or, any errors while trying to start X (only if you have a login of course).
The only error I get with the full-screen terminal (or what I think is an error), is, unstable tty..But that's it..
EDIT: Thanks! Startx works! Is there a way to get that to boot up automatially?
Run ksysv as root, and you can edit your init (the programs which are started automaticly at bootime). It should include the program kdm.Originally Posted by Kevin
Here is where kdm appears on mine, you can edit your's correspondingly (simply drag and drop, programs are to your left):
Runlevel 2 (kdm should be underneath rmnologin)
Runlevel 3 (kdm should be underneath rmnologin)
Runlevel 4 (kdm should be underneath rmnologin)
Runlevel 5 (kdm should be underneath rmnologin)
Stop (underneath Runlevel 0, kdm should be first)
Stop (underneath Runlevel 6, kdm should be first)
If kdm is already in these places, then, most likely, something is killing your init at bootime.
I'm sorry. I did not understand a WORD of that..lol
I'm fairly new to linux..
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
HPE 869102-001 Smart Array E208i-a SR Gen10 Storage Controller RAID SP: 871039
$116.99
Lot of 4 - Genuine Dell (62P9H) PERC H710 512MB Mini Blade 6Gbps SAS Raid
$44.99
Dell R630 8SFF 2.4Ghz 20-Core 128GB H730 RAID 10GB RJ-45 NIC 2x750W PSU 8x Trays
$455.04
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$87.99
Dell PowerEdge RAID Controller HBA330 12Gbs PCIe 3.0 SAS SATA J7TNV Low Profile
$29.00
4 Bay RAID External Hard Drive Enclosure for 2.5/3.5" SATA HDD/SSD
$79.99
G TECHNOLOGY G RAID 0G04228 2-Bay Thunderbolt 2 RAID Array W/Power Supply
$99.99