Sounds like you need to use a cheat code to pass the proper parameters to your hardware. Tell us about your video card and monitor. You can find the cheat codes in the Docs.
For some reason, when I boot up knoppix, It does all of the stuff it needs to do, but it doesnt take me to the desktop..Just a full screen terminal..
Can anyone help?
Sounds like you need to use a cheat code to pass the proper parameters to your hardware. Tell us about your video card and monitor. You can find the cheat codes in the Docs.
Well, I have a laptop with a 15.4 inch screen.
The video card...
A radeon IGP 354M w/64 mb of memory
Also..If it helps, I was going over to my mom's (different IP or something?(my parents are divorced)), and I was in the terminal, and typed "shutdown now"..it said "sending all proceses the TERM signal", then froze up, so I had to use a hard shutdown...If that makes a difference..It was working before when I was @ my dad's..
Can anyone help?
I presumed you were running the live cd. If so it shouldn't make any difference how it shut down. If running from hdd install then it *may* matter.
When you boot the disc on subsequent attempts are you using any cheat codes? Perhaps try:
knoppix xmodule=radeon
Or perhaps another cheat code or combination of codes. They can be found here: http://www.knoppix.net/docs/index.php/CheatCodes
Usually it should provide an error message when it fails to start X (x-windows). Post the error please.
I'm not running from the CD. I'm running from the HD. It has all the hardware info saved on it. So, I'm not sure why it wouldnt work, because It was working, like, ten minutes before..
I also have no clie how to enter the cheat codes..=/
Tell me, do you have a user login at the full screen terminal you get after booting?
If you do, you can login, and type the command:
or even:Code:startx
Then, you should have a desktop, unless something has gone terribly wrong with your installation.Code:X :0.0 | xterm -display :0.0 -e startkde
Also, you may wan't to post any errors you get at bootime (if any), and, or, any errors while trying to start X (only if you have a login of course).
The only error I get with the full-screen terminal (or what I think is an error), is, unstable tty..But that's it..
EDIT: Thanks! Startx works! Is there a way to get that to boot up automatially?
Run ksysv as root, and you can edit your init (the programs which are started automaticly at bootime). It should include the program kdm.Originally Posted by Kevin
Here is where kdm appears on mine, you can edit your's correspondingly (simply drag and drop, programs are to your left):
Runlevel 2 (kdm should be underneath rmnologin)
Runlevel 3 (kdm should be underneath rmnologin)
Runlevel 4 (kdm should be underneath rmnologin)
Runlevel 5 (kdm should be underneath rmnologin)
Stop (underneath Runlevel 0, kdm should be first)
Stop (underneath Runlevel 6, kdm should be first)
If kdm is already in these places, then, most likely, something is killing your init at bootime.
I'm sorry. I did not understand a WORD of that..lol
I'm fairly new to linux..
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
HP ProLiant DL360 G9 Server | 2 x E5-2660V3 2.6Ghz | 64GB | 2 x 900GB SAS HDD
$339.00
H261-Z61 2U 24SFF AMD Server 8x EPYC 7551 256-Cores 256GB RAM 8x25G NIC 2x2200W
$2612.18
Dell PowerEdge R730 8 SFF 2x E5-2660 v4 28 Cores 128/256GB 0/3x 900GB 6Gbps H730
$349.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$79.19
HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD
$196.95
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
HP ProLiant DL380 Gen9 16SFF 2x E5-2680v4 2.4GHz =28 Cores 64GB P840 4xRJ45
$353.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00