type lang=en at the boot prompt.
jd
Hello.
I downloaded Knoppix v3.3 a while ago, but I never played with it very much. Recently I inherited an old laptop and decided to try knoppix on it. The problem is that I can get Knoppix working, but in German. What do I need to type in order to get Knoppix working in English?
type lang=en at the boot prompt.
jd
Thank you very much. I will try it out now.
Also, is there a big improvement in v3.4?
I get an error:
Could not find kernel image: lang=en
Ok, I found out what was wrong.
I needed to type: knoppix lang=en
Thanx a lot for your help!
Sounds like you downloaded the German iso file. Next time you download a new version, make sure it has an "en" in the name, instead of the "de". Should be a new release before too long.
jd
DELL PowerEdge R430 8SFF 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$226.00
Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD
$197.99
Dell PowerEdge VXRAIL E560F 2x Xeon Gold 5120 2.20GHZ 384GB DDR4-2400MHZ 1100W
$499.99
Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays
$159.99
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
Dell PowerEdge R730 16-Bay 2.5” 2xE5-2695 v3 2.3Ghz 64GB iDRAC8 Ent H730 2x750W
$250.00
Lenovo ThinkServer TS140 Xeon E3-1225v3 3.20GHz 16GB RAM Tower Server Needs HDD
$99.99
Dell PowerEdge R720xd 26HDD 300gb 2.5-inch E5-2697 X 2CPU 384RAM 7.2 Tb HDD 
$180.00
Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config
$489.99
Cisco UCS C240 M4 2U Server w/ 2x E5-2680v4, NO RAM
$49.99