-
Senior Member
registered user
Youooohoooo..
I have to diasagree with User unknown. You can configure your print server without configuring your network. Your boss is right and always do
The way this printer server is configured, similar to configuring a router, infact it is a router cum print server. You only need to configure your network card before configuring it.
You can set your network later.
-
Junior Member
registered user
yodelahihoo....
okie shah....
i tried your way just now....
went to http://192.168.0.100 ==>my boss changed it....
when using windows web browser, i can see the system server information....
when using knoppix web browser, "an error occurred while loading http://192.168.0.100/status.htm.
could not connect to host 192.168.0.100."
argh!!!!
but before that, since i had the server information already i went ahead with the set up wizard....
it comes to a page(the same page im stuck at) where it asked for printer information....
i did a network scan (network : 192.168.0.0-255) and it shows ip address 192.168.0.3....
so i thought maybe that is the printer's ip address and so i just click on next,next,next....
when it comes to a test print, our printer did not even receive any data....
so its totally frustrating when i cant click on finish....
thnx(im gonna be bald!!),
~ira (-.-)~
-
Senior Member
registered user
Okay
Lets do step by step....
This procedure is for knoppix
1) Before run any web browsing to configure print server (which you did in windows) you need to set your network card. Run network card configuration. Assign IP address : 192.168.0.X (*x = don't use 100, already reserved to print server) Make sure it doesn't conflict with other pc.
netmask :255.255.255.0
2) Setup your printer using wizard and the ip is : 192.168.0.100 (what your boss set) and port : 631.
Don't scan, just click <next>. If success it will list all the printer driver. Select your printer type and model. Follow the instruction till end.
-
Junior Member
registered user
so sorry....
how do you configure the network card?
it will come out the black screen right?
~ira~
-
Senior Member
registered user
Caranya:
1) Click Penguin icon di bawah---> Network-->Networkcard configuration. Don't use dhcp.
-
Junior Member
registered user
hehe....
pandai-pandai guna bahasa melayu....
terima kasih....
bear with me please....
thnx....
~ira~
-
Junior Member
registered user
elo....
did those things you said....
ip address : 192.168.0.3
netmask : 255.255.255.0
default gateway : 192.168.0.1
that done....
did the wizard....
keyed in the ip : 192.168.0.100
error msg appeared....
"no printer found at this address/port!"
sedih saya....
~ira~
-
Senior Member
registered user
netcardconfig okay
cuba scan dengan same IP: 192.168.0.100 dan port :631
Kalau tak boleh, cuba tukar gateway too : 192.168.0.100
-
Senior Member
registered user
Forgot to ask, Is your port number really 631?
Please check using webrowser again. http://192.168.0.100
-
Junior Member
registered user
hiey....
still cant work....
did those things you said(again)....
ip address : 192.168.0.3
netmask : 255.255.255.0
default gateway : 192.168.0.100
broadcast address : 192.168.0.255
nameserver : IS-D2D363
that done(again)....
guess what shah?
i cant login to the internet pula after i configure the network card....
adeh....sakit hati saya (angry not evil)
,
~ira~
Similar Threads
-
By shantanuo in forum Networking
Replies: 0
Last Post: 09-20-2005, 05:52 AM
-
By brianfay in forum Hdd Install / Debian / Apt
Replies: 0
Last Post: 04-04-2005, 01:42 AM
-
By ebidder in forum MS Windows & New to Linux
Replies: 2
Last Post: 02-05-2005, 12:42 AM
-
By ptesone in forum Hardware & Booting
Replies: 0
Last Post: 03-16-2004, 08:25 PM
-
By urpk in forum General Support
Replies: 0
Last Post: 02-11-2004, 02:34 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$269.99
CSE-118 Supermicro 1U 3x GPU Server 2.6Ghz 20-C 128GB CX353A 2x1600W PSU Rails
$454.03
Intel Xeon E5-2680 v4 2.4GHz 35MB 14-Core 120W LGA2011-3 SR2N7
$17.99
Intel Xeon Gold 6140 SR3AX 2.3GHz 18-Core Processor CPU
$39.99
Intel Xeon Gold 6126 2.6 GHz LGA 3647 Server CPU Processor SR3B3
$17.99
Intel SR2JT Xeon E5-2683 v4 2.10GHz 16-Core CPU Processor
$24.95
HP Workstation Z640 2x Xeon E5-2623V4 32GB Ram Dual 256GB SSD K420 Linux GA
$234.98
Rare WaterCooled HP Z800 Workstation Dual Xeon X5680 16GB RAM 120GB SSD Nvidia
$279.56